High End Systems Roadster Orbital Head System user manual Control Function

CHAPTER 4

DMX Programming

Control Function

The Control parameter provides access to a number of Power Hub and Projector commands from the control desk.

Parameter DMX Value		Control Option	Description
Shutter	Control
0-255	0-9	Safe	Disables all Control settings for normal operation.
	10-19	Pan & Tilt MSpeed Off	Sets Pan & Tilt MSpeed off.
	20-28	Display Off	Sets display to off.
	30-38	Display Dim	Dims display characters.
	40-48	Display Bright	Brightens the display characters.
	60-68	Home All	Remotely homes the Orbital Head pan and tilt functions.
	70-78	Home ILS	Remotely detects the projector’s intelligent lens system
			after a lens change and homes the focus and zoom .
0	80-88	Lamp On	Remotely restrikes the fixture’s lamp.
	90-98	Lamp Off	Remotely extinguishes the fixture’s lamp.
			Remotely turns on the projector’s intelligent lens system
			on and allows focus and zoom control via RS-232. ILS off
	100-105	ILS On	is the projector’s initial default. Use this option when the
			ILS gets inadvertently turned off, or if the projector is
			replaced.
			Shuts down the fixture. The lamp is off, power to the
	120-130	Shutdown	motors is disabled, and the display reads [SHUTDOWN].
			Homing the fixture brings it back into operation.
	141-150	Horizontal offset right	These options are live so that the shutter can be open and
			you can center the image on the mirror. The commands
	151-160	Horizontal offset stop
			work like a remote control. Issue a left command and the
	161-170	Horizontal offset left
0-255			lens moves left until a stop is issued, or the lens reaches
	171-180	Vertical offset up	the end of travel. Likewise with up, down and right.
			These commands are best written as presets that can
	181-190	Vertical offset stop
			issued once rather then live dimming or scrolling from
	191-200	Vertical offset down	command to command.

Roadster Orbital Head System User Manual 33