42PD8800TA 55PD8800TA
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms |
| Check list | Page | ||
|
|
|
| ||
No picture | Check if the Power Cord is plugged into the socket fi rmly. | 17 , | 18 | ||
The Indicating lamp → Off | Check if the Main Power is ON. | ||||
|
| ||||
|
|
|
| ||
| Check if all the cables of the external equipments are connected |
|
| ||
No picture | correctly and fi rmly. |
|
| ||
Check if the power of the external equipments is ON. |
|
| |||
The Indicating lamp → Orange | 52 | ||||
Check if the TV/AV mode has been selected correctly. | |||||
It means that the unit is in “Power Save | |||||
Check if the PC is in Power Save mode or not. |
|
| |||
mode”. |
|
| |||
Refer to “Power Save mode” and “When following messages appears on |
|
| |||
|
|
| |||
| the screen”. |
|
| ||
|
|
|
| ||
No picture | Check if the signal cable is connected correctly and fi rmly. | 14 ~ 16 | |||
The indicating lamp → Green | Adjust the level of Brightness and Contrast lower. | ||||
|
| ||||
|
|
|
| ||
The top of the monitor and surface of | It may happen when you use the unit for long hours. Turn off the Main | 57 , | 59 | ||
the panel heat up. | Power of the unit for a while. Please note that this is not malfunction. | ||||
|
| ||||
|
|
|
|
| |
Image cannot be displayed in the correct | Press | button to check if the input signal of the displayed image is | 25 , | 57 , | |
position. | compatible with the specifi cation of the monitor. | 59 |
When the VCR is in special playback
It could happen when the VCR is connected to Component output, such
features (Fast Forward or Rewind), the
screen gets dark and cannot see the
as 480i. This is not malfunction.
image at all.
Try Composite output or
| There are some combinations of input signals that the images are not |
| |
The images are not displayed on sub | displayed on sub pictures. | 41 ~ 43 | |
pictures in “Multi Picture mode” | Please check the Table of | 60 | |
| details. |
|
|
|
|
| |
| The display size is fi xed at “FULL” when the receiving signals are |
| |
Screen display size cannot be switched | 1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz. | , 39 | |
correctly. | Check the signal status by pressing the | 38 | |
button on the remote |
| ||
| control. |
|
|
|
|
|
|
| Check if the cables are connected correctly. |
|
|
Cannot be displayed the image from | Check the output format of the equipments. | 57 | ~ 59 |
HDMI 1 or 2. |
| ||
(Please refer to “Connecting Procedure” and “Recommended Signal |
| ||
| List”.) |
|
|
55
HITACHI
Downloaded From | 2005/11/14 13:38:38 |