Hitachi DZBX35A 146, Operating sound is, Heard cyclically Does not indicate a fault

English		Symptom		Cause and Correction	Reference
					page
	Operating sound is		This sound is heard because the disc is cyclically operated and
	heard cyclically.		does not indicate a fault.		—
	Some vibrations are felt		These vibrations or sound are caused by disc drive: This does
	or slight sound is heard		not indicate a fault.		—
	from mechanism.
	•	No operation can be	In the following cases, it will take more time than usual until
		performed because	operation is possible:
		the ACCESS/PC or	•	Immediately after a disc or card is reinserted.
		CARD ACCESS	•	When a long time has elapsed since the DVD video camera/
		indicator on this DVD		recorder was turned off last.
		video camera/	•	When the temperature is greatly different from the status of	—
		recorder remains lit or		previous recording.
		blinking.	• When disc with scratches, dirt or fingerprints is inserted.
	•	After disc or card is	•	When disc is subject to severe vibrations.
		inserted, it takes	•	When the battery or DC power cord was disconnected instead
		some time until		of following the correct procedure using power switch to turn
		recording is possible.		the DVD video camera/recorder off.
	No image in viewfinder.		Is LCD monitor open?
			No image will appear in viewfinder unless the LCD monitor is		—
			closed and securely locked to DVD video camera/recorder.
	No image appears on		•	Is DVD video camera/recorder connected to PC using PC
	the LCD screen or in			connection cable?
	the viewfinder.			Unplug the PC connection cable.
			•	Does DVD video camera/recorder stop at the end of the scene	—
				to which wipe-out was set and played back?
				Press the DISC NAVIGATION button.
			•	Is the DVD video camera/recorder set to the sleep/restart
				status?

146