Hitachi DZBX35A instruction manual 136

English	Message		Cause & Troubleshooting	Reference
				page
	Disc error has occurred.	Disc error could have occurred during editing of scenes.
	Keep disc inside &	Turn off the DVD video camera/recorder with the disc being used		26
	restart.	in it, connect AC adapter/charger, and then power the DVD video
		camera/recorder again. Repair of scenes will be tried.
	Disc error has occurred.	This message will appear when disc error occurred during
	Unfinalizing is not	unfinalization, and unfinalizing disc failed. Replace the disc.		103
	complete.
	Disc error has occurred.	•	Use another disc.	10, 24
		•	See *3 and *4 on page 139.
		•	Mismatch in recording information may be caused by editing
			done on some device other than this DVD video camera/
			recorder.	99
			Initialize the disc or use another disc.
		•	Initializing the disc will erase all data on it.
	Disc full. Cannot	Delete unnecessary scenes before using this disc, or use another		79
	execute.	disc.
	Disc has no data.	This message will appear when an attempt is made to execute		—
		playback or editing on Disc Navigation with no scene recorded.
	Disc has no PlayList.	Switching of play list was selected with no play list stored.		93
	Disc includes protected	The disc may be software protected from a device other than this
	scenes. Delete scenes?	DVD video camera/recorder. To release this case, use a device		—
		that has executed software-protect.
	Disc is full. Cannot add	The number of entered scenes has reached the limit that can be
	control info.	entered, so the control information for generating thumbnails		79, 81
		cannot be added.
		Combine several scenes or delete them.
	Disc is not formatted.	•	Has the disc been initialized on a PC?
	Format the disc now?		Choose “YES” and initialize the disc when using it on this DVD
			video camera/recorder. Initialization will delete all data on the	99
			disc.
		•	See *2 on page 139.
	Disc must be finalized	•	This message will appear if you remove a DVD-RW (VF-mode)/
	before it can be played		DVD-R that has not been finalized from the DVD video camera/	108
	back on DVD player or		recorder.
	DVD recorder.	•	See *5 on page 139.
	Drive overheat. Please	The temperature inside the DVD video camera/recorder is too
	retry later.	high, and reading or writing of the data on disc may not be
		performed normally.		31
		Turn the DVD video camera/recorder off and wait for a while. The
		temperature will be effectively decreased if the DVD video
		camera/recorder is placed in a well-ventilated spot.
	DVD-R* Disc, 16:9	With DVD-RW (VF-mode)/DVD-R/+RW disc, the setting of 16:9
	mode cannot be	mode will not be possible when the Video mode is STD.		63
	changed, when Video	* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode),
	mode is STD.		“+RW” will appear when using a +RW.
	DVD-R* Disc, Input	Once a DVD-RW (VF-mode)/DVD-R disc has been recorded in
	Source cannot be	the 16:9 mode, the input source will not be changeable.		63
	changed.	* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).

136