TIP: If you want to set a specific IP address on a specific network printer, click the Set IP Address button. The Set IP Address window appears. Do as follows:
a. Select a printer to be set with a specific IP address from the list.
b. Configure an IP address, subnet mask, and gateway for the printer manually and click Configure to set the specific IP address for the network printer.
c. Click Next.
6Select the components to be installed and click Next.
7You can also change the printer name, set the printer to be shared on the network, set the printer as the default printer, and change the port name of each printer. Click Next.
To install this software on a server, select the Setting up this printer on a server checkbox.
8After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next.
Otherwise, just click Next and skip to step 10.
9If the test page prints out correctly, click Yes. If not, click No to reprint it.
10Click Finish.
NOTE: After setup is complete, if your printer driver doesn’t work properly, reinstall the printer driver. See "Reinstalling Printer Software" on page 10.
9
Installing Printer Software in Windows
