Xerox 3435DN manual Installing SetIP Using SetIP, Click Install SetIP UtilityOptional

Models: 3435 3435DN

1 98
Download 98 pages 16.96 Kb
Page 72
Image 72
2 Using SetIP

2 Using SetIP

Installing SetIP

Using SetIP

Installing SetIP

1 Make sure that the printer is connected to your computer and powered on.

2Insert the supplied CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run, and an installation window appears.

If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.

3Click Install SetIP Utility(Optional).

4Click Next.

11 Using SetIP

5Click Next.

6Click Finish.

Using SetIP

1From the Windows Start menu, select Programs or All

Programs Æ your printer driver name Æ SetIP Æ SetIP.

The program automatically detects and displays new and configured print servers on your network.

2 Select the name of your printer and click

. If you

cannot find your printer name, click

to refresh

the list.

 

NOTES:

To confirm the MAC address, see the NETWORK PRINTER CARD TEST PAGE. The NETWORK PRINTER CARD TEST PAGE will be printed after the Configuration Page.

The refreshed list doesn’t show your printer, click •Installing SetIP enter your network printer card’s IP address, subnet mask, default gateway, and then click Apply.

3Click OK to confirm the settings.

4Click Exit to close the SetIP program.

Page 72
Image 72
Xerox 3435DN manual Installing SetIP Using SetIP, Click Install SetIP UtilityOptional