Safety
Read these safety notes carefully before using this product to ensure you operate the equipment safely.
Your Xerox product and supplies have been designed and tested to meet strict safety requirements. These include safety Agency approval, and compliance to established environmental standards. Please read the following instructions carefully before operating the product and refer to them as needed to ensure the continued safe operation of your product.
The safety testing and performance of this product have been verified using Xerox materials only.
WARNING: This WARNING mark alerts users to the possibility of personal injury.
WARNING: This WARNING mark alerts users to heated surfaces.
CAUTION: This symbol indicates a Laser is being used in the equipment and alerts the user to refer to the appropriate safety information.
WARNING: This product must be connected to a protective earth circuit.
Operator Accessible Areas
This equipment has been designed to provide operator access to safe areas only. Operator access to hazardous areas is restricted using covers or guards, which require a tool to enable removal.
Never remove these covers or guards.
Maintenance Information
1.Any operator product maintenance procedures will be described in the user documentation supplied with the product.
2.Do not carry out any maintenance on this product which is not described in the customer documentation
WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when used on electromechanical equipment.
3.Use supplies and cleaning materials only as directed in the Operator section of this manual.
4.Do not remove covers or guards that are fastened with screws. There are no parts behind these covers that you can maintain or service.
Operational Safety Information
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards.
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all times:
Do These:
•Always follow all warnings and instructions that are marked on or supplied with the equipment.
•Before cleaning this product, unplug the product from the electrical outlet. Always use materials specifically designated for this product, the use of other materials may result in poor performance and create a hazardous situation.
WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when used on electromechanical equipment.
•Always exercise care when moving or relocating equipment.
•Always locate the machine on a solid support surface (not on plush carpet) that has adequate strength to support the weight of the machine.
•Always locate the machine in an area that has adequate ventilation and room for servicing.
•Always unplug this equipment from the electrical outlet before cleaning.
NOTE: Your Xerox machine is equipped with an energy saving device to conserve power when the machine is not in use. The machine may be left on continuously.
CAUTION: The metallic surfaces in the fuser area are hot. Please use caution when removing paper jams from this area and avoid touching any metallic surfaces.
Do Not Do These:
•Never use a ground adapter plug to connect the equipment to a power outlet that lacks a ground connection terminal.
•Never attempt any maintenance function that is not specifically described in this documentation.
•Never obstruct ventilation openings. They are provided to prevent overheating.
i
