Item |
| Explanation |
|
|
|
Job Timeout |
| Values: 0 ~ 1800 sec |
|
| |
| You can set the length of time the printer waits | |
| before printing the last page of a print job that | |
| does not end with a command to print the page. | |
| The default is 15 sec. | |
| When a print | |
| the page in the print buffer. | |
|
| |
Maintenance | This item allows you to maintain your printer. | |
| • | Clean Drum: Cleans the OPC drum of the |
|
| cartridge and produces a cleaning sheet with |
|
| toner debris on it. |
| • | Clean Fuser: Cleans the fuser unit inside of |
|
| the printer and produces a cleaning sheet |
|
| with toner debris on it. |
| • | Supplies Life: This item allows you to check |
|
| how many pages have printed and how much |
|
| toner is left in the cartridge. |
|
| |
Clear Setting | This menu item allows you to restore the | |
| printer’s factory default settings. | |
|
|
|
Emulation menu
Use the Emulation menu to configure printer language emulation.
Item | Explanation | |
|
| |
Emulation | Values: Auto, PCL, EPSON, PostScript, IBM | |
Type | ||
| ||
| The printer language defines how the computer | |
| communicates with the printer. | |
| If you select Auto, your printer can change the | |
| printer language automatically. | |
|
| |
Setup | Values: PCL, PostScript, EPSON | |
|
See the tables on page 2.5 to configure the printer language.
PCL
This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and point size.
Item | Explanation |
|
|
Typeface
Values: PCL 1 ~ PCL 54
You can select the standard font to be used in PCL emulation.
•PCL 1~PCL 7’s interval between letters is fixed, and PCL 8~PCL 45’s interval is proportional to the font type and point size. You can adjust the font size of PCL 1~PCL 7 using the Pitch item, and
PCL 8~PCL 45 can do using Point Size item.
•PCL 46~PCL 54’s interval and point size are fixed.
Symbol | Values: ROMAN8 ~ PCYRIL |
|
This item selects the symbol to be used in PCL emulation. The symbol is the group of numbers, marks, and special signs being used when printing letters. The default is PC8.
Point Size | Values: 4.00 ~ 999.75 (0.25 unit) |
|
When you select one between PCL 8 and PCL 45 from the Typeface menu, you can determine the font size by setting the height of the characters in the font. The default is 12.00.
Courier | Values: Regular, Dark |
|
This item lets you select the version of Courier font to use.
Pitch
Values: 0.44 ~ 99.99 (0.01 unit)
When you select a font between PCL 1 and PCL 7 from the Typeface menu, you can determine the font size by setting the number of characters that will print in one horizontal inch of type. The default value, 10 is the best size.
Lines | Values: 5 ~ 128 (1 unit) |
|
This item allows you to set vertical spacing from 5 to 128 lines for the default paper size. The lines may differ according to the paper size and printing orientation.
2.5 <System setup>
