Using the Unified Driver Configurator
Unified Linux Driver Configurator is a tool primarily intended for configuring Printer.
After installing the Unified Linux driver, the Unified Linux Driver Configurator icon will automatically be created on your desktop.
Printers Configuration
Printers configuration has the two tabs: Printers and Classes.
Printers Tab
You can see the current system’s printer configuration by clicking on the printer icon button on the left side of the Unified Driver Configurator window.
Opening the Unified Driver
Configurator
1Double-click Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select Xerox Unified Driver and then Unified Driver Configurator.
2Press each button on the Modules pane to switch to the corresponding configuration window.
Switches to Printer configuration.
Shows the status, model name and URI of your printer.
Shows all of the installed printer.
Printers Configuration button 
Scanners Configuration button 
Ports Configuration button 
You can use the onscreen help by clicking Help.
3After changing the configurations, click Exit to close the Unified Driver Configurator.
28
Using Your Printer in Linux
You can use the following printer control buttons:
•Refresh: renews the available printers list.
•Add Printer: allows you to add a new printer.
•Remove Printer: removes the selected printer.
•Set as Default: sets the current printer as a default printer.
•Stop/Start: stops/starts the printer.
•Test: allows you to print a test page to check if the machine is working properly.
•Properties: allows you to view and change the printer properties. For details, see page 29.
