•Never remove covers or guards that are fastened with screws. There are no operator serviceable areas within these covers.
•Never locate the machine near a radiator or any other heat source.
•Never push objects of any kind into the ventilation openings.
•Never override or "cheat" any of the electrical or mechanical interlock devices.
•Never place this equipment where people might step on or trip on the power cord.
•This equipment should not be placed in a room unless proper ventilation is provided. Please contact your local Authorized dealer for further information.
Electrical Safety Information
1.The power receptacle for the machine must meet the requirements stated on the data plate on the rear of the machine. If you are not sure that your electrical supply meets the requirements, please consult your local power company or an electrician for advice.
2.The socket outlet shall be installed near the equipment and shall be easily accessible.
3.Use the power cable that is supplied with your machine. Do not use an extension cord or remove or modify the power cord plug.
4.Plug the power cable directly into a correctly grounded electrical outlet. If you are not sure whether or not an outlet is correctly grounded, consult an electrician.
5.Do not use an adapter to connect any Xerox equipment to an electrical outlet that lacks a ground connection terminal.
6.Do not place this equipment where people might step or trip on the power cable.
7.Do not place objects on the power cable.
8.Do not override or disable electrical or mechanical interlock devices.
9.Do not push objects into slots or openings on the machine. Electrical shock or fire may result.
10.Do not obstruct ventilation openings. These openings are used to provide proper cooling to the Xerox machine.
Electrical Supply
1.This product shall be operated from the type of electrical supply indicted on the product's data plate label. If you are not sure that your electrical supply meets the requirements, please consult a licensed electrician for advice.
WARNING: This equipment must be connected to a protective earth circuit. This equipment is supplied with a plug that has a protective earth pin. This plug will only fit into an earthed electrical outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact a licensed electrician to replace the outlet.
2.Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked by a qualified electrician.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a
Emergency Power Off
If any of the following conditions occur, turn off the machine immediately and disconnect the power cable(s) from the electrical outlet(s). Contact anauthorized Xerox Service Representative to correct the problem:
The equipment emits unusual odours or makes unusual noises. The power cable is damaged or frayed. A wall panel circuit breaker, fuse, or other safety device has been tripped. Liquid is spilled into the machine. The machine is exposed to water. Any part of the machine is damaged.
ii
