PostScript
This menu provides you with the Print PS Error menu item.
Item | Explanation | |
|
| |
Print PS | Values: On, Off | |
Error | ||
|
You can select whether or not your printer prints an error list when a PS error occurs.
•Select On to print PS 3 emulation errors. If an error occurs, the job stops processing, the error message prints, and the printer flushes the job.
•If this menu is set to Off, the job is flushed without an indication of the error.
EPSON
This menu sets the EPSON emulation configuration.
Item | Explanation |
|
|
Font
Values: SANSERIF, ROMAN
You can select the standard font that will be used in
EPSON emulation.
Character | Values: USA, FRANCE, GERMANY, UK, | |
Set | ||
DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN, | ||
| NORWAY, DENMARK2, SPAIN2, LATIN |
This item allows you to select a character set of the desired language.
Character | Values: ITALIC, PC437US, PC850 | |
Tab. | ||
| ||
| This item selects the character set. | |
Pitch | Values: 10, 12, 17.14, 20 | |
|
You can determine the font size by setting the number of characters that will print in one horizontal inch of type.
LPI | Values: 6, 8 |
|
You can set the number of lines printed in one vertical inch.
Auto | Values: Off, On | |
Wrap | ||
|
This item determines whether or not the printer automatically performs line feed when the data overflows the printable area of the print material.
Network menu
This menu lets you configure the network interface installed in your printer. You can reset the network interface and print a configuration page.
Item | Explanation |
|
|
TCP/IP | Values: DHCP, BOOTP, Static |
|
This item allows you to manually set the TCP/IP addresses or receive the addresses from the network.
•DHCP: The DHCP server assigns the IP address to you automatically.
•BOOTP: The BOOTP server assigns the IP address to you automatically.
•Static: You can enter IP address, subnet mask, and gateway manually.
EtherTalk |
| Values: Off, On |
|
| |
| This item lets you select whether or not you use the | |
| EtherTalk protocol. | |
| • | Off: You can disable the EtherTalk protocol. |
| • | On: You can enable the EtherTalk protocol. |
|
|
|
Ethernet |
| Values: Auto, 10M Half, 10M Full, 100M Half, |
Speed |
| |
| 100M Full | |
|
| |
| This item allows you to select the ethernet speed. | |
|
| |
Clear | This item performs a simple reset and restores the | |
Setting | factory default settings for the network | |
| configuration. This setting will only take effect after | |
| you have reset the printer. | |
|
| |
Network | This item prints a page showing the network | |
Info. | parameters you set. | |
|
|
|
802.1x |
| Values: Off, On |
|
| |
| This item is for connecting with an authentication | |
| server. If you need to connect this product to an | |
| authentication server, set this item On. | |
|
|
|
CentreWare |
| Values: Off, On |
IS |
| |
|
| |
| This item lets you select whether or not you use the | |
| embeded web server called CentreWare IS. If you | |
| turn this item Off, you cannot connect to the | |
| printer’s embeded web server. | |
2.6 <System setup>
