Item |
| Explanation |
|
| |
Duplex | In this menu, you can set the margins for double- | |
Margin | sided printing. You can increase or decrease the | |
| value in 0.1 mm increments. | |
| • | Top Margin: Set the top margin, from 0.0 to 9.9 |
|
| mm. The default is 5.0 mm. |
| • | Left Margin: Set the left margin, from 0.0 to 9.9 |
|
| mm. The default is 5.0 mm. |
| • | Short Binding: Set the bottom margin of the |
|
| back of the page for short binding, from 0.0 to 22 |
|
| mm. The default is 0 mm. |
| • | Long Binding: Set the right margin of the back |
|
| of the page for long binding, from 0.0 to 22 mm. |
|
| The default is 0 mm. |
|
|
|
Paper menu
Use the Paper menu to define all settings relating to print material input and output, as well as the specific print material you are using with your printer.
Item | Explanation |
|
|
Copies
Values: 1 ~ 999
Set the default number of copies by selecting any number from 1 to 999. The default is 1.
Paper Size
Values: A4, A5, A6, JIS B5, ISO B5, Letter,
Legal, Executive, No.10 Env., Monarch Env., DL
Env., C5 Env., C6 Env., US Folio, Oficio,
Custom Paper
Select the paper size currently loaded in tray.
•Custom Paper: You can configure the size for your own custom paper. Set the width from 98 mm to 216 mm, and the height from 148 mm to 356 mm.
Paper Type | Values: Plain Paper, Bond, Transparency, |
| Envelope, Labels, Card Stock, Preprinted, |
| Color, Cotton Paper, Recycled, Achive, Thick, |
| Thin |
Select the paper type currently loaded in tray.
Paper | Values: , Tray 1, Tray 2, MP Tray, |
Source | |
| Manual Tray, Auto |
Using this item, you can set which tray you want to use.
•Auto: The printer can automatically determine the source.
•Manual Tray: The printer uses MP Tray.
•Tray 2: Available only when optional tray is installed.
Tray | Values: Off, On | |
Chaining | ||
|
When you select any other value except Auto from Paper Source and the selected tray is empty, the printer automatically prints from other trays.
If this menu item is set to Off, the Status LED lights red and the printer doesn’t work until you insert paper into the specified tray.
2.3 <System setup>
