![](/images/new-backgrounds/1245247/245247285x1.webp)
Symptom | Cause and Correction | Reference | |
page | |||
|
| ||
Photos on card cannot | This DVD video camera/recorder can play back image data |
| |
be played back. | recorded on SD memory card in other digital cameras conforming |
| |
| to the DCF (Design rule for Camera File system) standard. The |
| |
| range of image data normally playable on this DVD video |
| |
| camera/recorder is that with pixels from 80 horizontal × 60 |
| |
| vertical to 4000 horizontal × 3000 vertical. If the pixel data is |
| |
| outside this range, blue thumbnails will appear (thumbnails* in |
| |
| the figure), meaning the image is unplayable. |
|
A l l | scenes | 1/ 6 |
|
| — |
PLAY |
| |
* |
| Fig. 1 |
Even when the number of pixels is within the above range, playback may not be possible, depending on the recording status of the digital cameras used.
DCF (Design rule for Camera File system) is an integrated image file format of digital cameras: Image files can be used on all digital devices conforming to DCF.
It will take some time to | When playing back a still, “Playback.” will appear: Stills with a |
|
play back photos on | large number of pixels will take some time to appear. | — |
card. |
|
|
When the DVD video camera/recorder is connected to PC:
Symptom | Cause and Correction | Reference | |
page | |||
|
| ||
No drive icon appears | The DVD video camera/recorder is not turned on. | 31 | |
on PC. | Check the power supply. | ||
| |||
|
|
| |
| Turn PC off and then disconnect the PC connection cable. Turn |
| |
| PC on again, and then use the PC connection cable to connect | — | |
| the DVD video camera/recorder to PC. |
| |
|
|
| |
| Make sure the PC connection cable is completely plugged into | — | |
| this DVD video camera/recorder. | ||
|
| ||
|
|
| |
Error occurs in playback | If error occurs with USB connection, the transfer rate is not |
| |
of DVD video camera/ | sufficient. It is recommended that you use a USB terminal | 113 | |
recorder on PC. | conforming to USB2.0 when connecting the DVD video camera/ | ||
| |||
| recorder. |
| |
|
|
| |
Application is not | Turn the PC and DVD video camera/recorder off, and try again. | — | |
normally run on PC. |
| ||
|
| ||
|
|
| |
Error occurs during | The temperature of DVD video camera/recorder is too high due |
| |
writing to disc. | to continuous operation. |
| |
| Disconnect the DVD video camera/recorder from PC once, | — | |
| remove the disc from the DVD video camera/recorder, and then | ||
|
| ||
| turn it off. After a few moments, connect them again and write to |
| |
| a |
| |
|
|
|