Inserting Batteries into Remote Control

Insert two AA (LR06) batteries (provided) into the remote control to power it.

1 Open the battery compartment lid on the back of remote control and insert the batteries.

Note: If the batteries are discharged, pressing any button on remote control cannot operate the DVD video camera/recorder: Replace the batteries.

2 Close the lid.

Using Remote Control

Point the remote control to the infrared receiver on the DVD video camera/recorder. The remote con- trollable distance is up to 18 feet (5 m).

10

Note: When using the remote control, make sure that the infrared receiver on DVD video camera/ recorder is not exposed to direct sunlight or any intense light. If the infrared receiver is subject to light stronger than the infrared light from remote control, the DVD video camera/recorder cannot be operated by remote control.

Note: If there is an obstacle between the remote control and infrared receiver on DVD video cam- era/recorder, remote control may not be possible. Note: The DVD video camera/recorder uses the “VCR2” remote control code of Hitachi VCRs. If you use a Hitachi VCR, etc. with remote control code set to “VCR2”, a VCR placed near the DVD video camera/recorder will also be operated by

15

10

the remote control: To prevent this, change the remote control code of the VCR.

15

English

29

Page 29
Image 29
Hitachi DZMV200A, DZMV230A instruction manual Inserting Batteries into Remote Control, Using Remote Control