Changing Title of Program
The recording date/time has initially been attached to any program: You can change the recording date/ time to any desired title.
1 Press the DISC NAVIGATION button and then the MENU button.
The Disc Navigation menu screen will appear.
2 Use the joystick to choose “Title” on the
“Program” menu screen, and then press
the
button.
The “Program Title” screen will appear.
3 Use the joystick to select the program whose title you want to change, and
then press the
but- ton.
The screen for entering a title will appear.
4 Use the joystick to select a letter and then press
the
button: The se- lected letter will be en- tered.
Repeat this procedure to create a title.
5 After entering the title, use the joystick to choose “Enter” and then
press the
button.
The screen for verifying the entered title will ap- pear: Choose “YES” and
then press the
but- ton.
After the following mes- sage appears, the thumb- nail display screen of the program whose title was set will be restored.
Choosing “NO” or pressing the 
button will restore the screen for inputting a title.
Note: If you wish to delete the letter for title, press
the 
button once: The input letter will be deleted. Holding down the stop button will delete all letters in the TITLE column. You can also use the DELETE button on remote control to delete any input let- ters.
Note: To cancel the setting of title, choose “NO”
on the screen for verifying the entered title: The screen for verifying cancellation of title setting will appear. To cancel title setting, choose “YES”.
●Characters available for entering title
You can select characters from the “capital letter”, “small letter” and “symbol” input modes.
With step 4, select the input mode and then press
the
button, or press the DISPLAY button on the DVD video camera/recorder.
Input mode
English
73
