Hitachi DZMV200A Input Selection, Quality Disc used Mode, Approx min, Usually select this option

●Recordable times in each movie quality mode (on one side of disc)

Quality	Disc used
mode	DVD-RAM	DVD-R
XTRA*	approx. 18~60 min	—
FINE	approx. 30 min	approx. 30 min
STD	approx. 60 min	approx. 60 min
LPCM	—	approx. 30 min

The recordable times are only for reference.

*The XTRA mode can be set on the DZ-MV230A only: The recordable times will vary depend- ing on recording contents.

Input Selection

Note: When using DVD-R disc, you cannot switch the movie quality mode during recording on the disc: The DVD video camera/recorder will be au- tomatically set to the quality mode first used with the disc for recording.

Note: The setting of movie quality mode is effec-

tive only during movie recording: Switching the mode will not work during still recording.

If you wish to input an image from another device to this DVD video camera/recorder, you must first switch the setting on the DVD video camera/recorder.

Refer to the explanation starting from page 92 on how to connect the DVD video camera/recorder to other devices or record images input from them.

CAMERA	Usually select this option.
LINE	To view image from another device on this DVD video camera/recorder

1 Press the MENU button in the recording pause status.

The menu screen will appear.

2 Use the joystick to choose “Input Source” on the “Record Functions Setup” menu screen, and

then press the button.

The options will appear on the right of “Input Source”: The mark will be attached to the cur- rently selected option.

3 Select the desired option and then press the button: The selected op- tion will be set.

4 Press the MENU button.

The menu screen will disappear.

Note: The “Input Source” setting will return to “CAMERA” whenever the DVD video camera/re- corder is turned off.

English

59