Searching for Point You Wish to View by Specifying It (Go To)
You can specify any point that you want to view in order to search for it.
1 Press the MENU button during playback or playback pause.
The “Go To” menu screen will appear.
2 Use the joystick to choose the option (point you | |||
want to go to), and then press the |
| button. | |
Top | : To go to the start of first scene on disc | ||
| (scene 1), and enter playback pause. | ||
End | : To go to the end of last scene on disc, | ||
and enter playback pause.
Specify : To go to a specified point and enter playback pause. See the following for details.
●Specifying the point to view
1 Choose “Specify” in step 2 above, and then press
the 
button.
The screen for specifying the point to go to will appear.
Time to the midway
point of this scene Recording time of this scene
Cursor
Cursor position
2 Use the joystick to select the desired time of cho- sen point.
: To select the start of first scene on disc.
: To select the end of last scene on disc.
: To move the cursor toward the end of last scene on disc in
: To move the cursor toward the start of first scene on disc in units of a minute.
(When the start of scene is selected)
3 Press the
button to enter the selection.
The DVD video camera/recorder will go to the specified point and enter the playback pause status.
To cancel the “Go To” procedure midway, press the
English
button before going to the specified point.
Note: The cursor may not move at
46
