Hitachi DZMV550A, DZMV580A instruction manual 168

	Message		Cause & Troubleshooting	Reference
				page
	Disc error has occurred.	The disc may be dirty.
	Formatting is not	Remove the disc and wipe off fingerprints, dust, etc. before reusing
	complete.	it, or use another disc.		82, 135
		This message may also appear if you insert a disc for which
		formatting was interrupted midway. In this case, use another disc.
	Disc error has occurred.	Disc error could have occurred during editing of scenes.
	Keep disc inside &	Turn off the DVD video camera/recorder with the disc being used in		43
	restart.	it, connect AC adapter/charger, and then power the DVD video
		camera/recorder again. Repair of scenes will be tried.
	Disc error.	•	Use another disc.	25, 82
		•	See *3 on page 171.
		•	Mismatch in recording information may be caused by editing
			done on some device other than this DVD video camera/recorder.	135
			Initialize the disc or use another disc.
		•	Initializing the disc will erase all data on it.
	“DISCERROR”appears	If you have write-protected a disc using the write-protect setting tool
	when an attempt to	(WPTOOL) that is equipped with the UDF driver contained on the
	release write-protect is	CD-ROM provided with this DVD video camera/recorder, you		
	made.	cannot release the write-protect on this DVD video camera/
		recorder as is. Use the write-protect setting tool on PC to release the
		write-protect.
	Disc full. Cannot	Delete unnecessary scenes before using this disc, or use another		111
	execute.	disc.
	Disc has no data.	This message will appear when an attempt is made to execute		
		playback or editing on Disc Navigation with no scene recorded.
	Disc has no Play List.	Switching of play list was selected with no play list stored.		127
	Disc includes protected	The disc may be software protected from a device other than this
	scenes. Delete scenes?	DVD video camera/recorder. To release this case, use a device that		
		has executed software-protect.
	Disc is full. Cannot add	The number of entered scenes has reached the limit that can be
	control info.	entered, so the control information for generating thumbnails		111, 116
		cannot be added.
		Combine several scenes or delete them.
	Disc is not formatted.	• Has the disc been initialized on a PC?
	Format the disc now?		Choose “YES” and initialize the disc when using it on this DVD	135
			video camera/recorder. Initialization will delete all data on the disc.
		•	See *2 on page 171.
	DPOF is not set to a	This message will appear when “Slide Show: DPOF” is specified for		139
English	scene.	the card to which DPOF was not set.
	DPOF scenes over limit.	The maximum number of scenes for which DPOF can be set is 999.
	Cannot set DPOF			120
	scenes.
	Drive overheat. Please	The temperature inside the DVD video camera/recorder is too high,
	retry later.	and reading or writing of the data on disc may not be performed
		normally.		48
		Turn the DVD video camera/recorder off and wait for a while. The
		temperature will be effectively decreased if the DVD video camera/
		recorder is placed in a well-ventilated spot.

168