Trouble Messages

A message may appear while you are operating the DVD video camera/recorder. If a message appears, refer to the following table and take appropriate corrective action.

Messages are arranged in alphabetical order.

Message

 

Cause & Troubleshooting

Reference

 

 

page

 

 

 

 

 

 

(1) Data error in a part of

It is possible that the system cannot normally complete writing of file

 

 

 

image file. Repair data

when power is turned off for some reason during recording or

 

 

 

now?

editing (deleting, dividing or combining scenes, or creating play list).

 

 

 

(2) Found error in image

Selecting “YES” will automatically repair the video file, but even if

 

 

 

file. Repair data now?

“NO” is selected, the same message will appear when the DVD

 

 

 

(3) Data error in all

video camera/recorder is turned on next time. (Do not remove the

 

 

 

image file. Repair all

disc while the DVD video camera/recorder is recognizing it: Ignoring

 

 

 

data now?

this will deactivate the file repair function.)

 

 

 

 

Follow the instructions on screen, taking note of the following

 

 

 

 

cautions:

 

 

 

 

Be sure to use the AC adapter/charger to power the DVD video

 

 

 

 

 

camera/recorder when repairing data: Repair is not possible

 

 

 

 

 

using a battery. If a battery has been attached, turn the power

 

 

 

 

 

switch off once, connect the AC adapter/charger, and then start

 

 

 

 

repairing.

 

 

 

 

 

 

 

Data may not be repaired, depending on the timing when power

 

 

 

 

was turned off.

 

 

 

 

Data may not be repaired normally if data recorded on another

 

 

 

 

recorder is mixed in.

 

 

 

 

The repaired data may be different from the original recorded

 

 

 

 

 

content because of partial deletion of defective portion.

 

 

 

 

Since the date/time for repair is added to the repaired data (only

 

 

 

 

 

the corrected portion for partial repair), the original date/time

 

 

 

 

information will be lost.

 

 

 

 

Since all movies, and then all stills, are repaired, the order of

 

 

 

 

 

recorded contents will be lost.

 

 

 

 

(In case of message (2) (3) only)

 

 

 

 

See *1 on page 171.

 

 

 

 

 

 

 

 

(1) Disc is not formatted.

DVD-R disc that was not initialized for camera use was inserted.

 

 

 

If it formats, it becomes

 

 

 

 

 

possible to use for

 

 

 

 

 

camera.

 

 

 

 

 

(2) However, when you

 

 

45

 

 

record from PC

 

 

 

 

 

connection terminal,

 

 

 

 

 

please do not format.

 

 

 

 

 

(3) Format the disc now?

 

 

 

 

English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

165

Page 165
Image 165
Hitachi DZMV580A, DZMV550A instruction manual Trouble Messages, 165, Message Cause & Troubleshooting Reference