Hitachi DZMV550A, DZMV580A Recording Dubbing Images on Other Video Devices, Cable provided

RECORDING (DUBBING) IMAGES ON OTHER VIDEO DEVICES

You can record (dub) images played back on this DVD video camera/recorder, on other video devices. Use the AV/S input/output cable (provided) to connect the DVD video camera/recorder to another video device as shown in the following figure:

Signal flow

A/V

MIC To AV input/output jack

AV/S input/output

cable (provided)

To S-VIDEO input jack of VCR, etc.*

To video/ audio input jacks

Yellow

White

Red

*If the video device to be connected has an S video input jack, you can connect it to the DVD video camera/ recorder.

1 Press the DISC NAVIGATION button.

2 Select a scene to be played back.

3 Press the playback (A) button on this DVD video camera/recorder and the record button on connected device: The DVD video camera/ recorder will start playback and the recorded device will record (dub) it.

Note:

•Using an S-video jack will deliver clearer images.

•Audio is heard from the speaker: If the volume is too high, noise may enter the dubbed image.

•It is recommended that you use Disc Navigation to create a play list including the scenes to be dubbed among the scenes recorded on this DVD video camera/ recorder (P.126).

•Be sure to use the AC adapter/charger to power the DVD video camera/recorder from AC outlet, to prevent battery power from shutting off during recording on another video device.

•If you are using a Hitachi VCR, using the remote control provided with this DVD video camera/recorder may operate the VCR. To record (dub) images from the DVD video camera/recorder to Hitachi VCR, change the remote control code of VCR to a position other than “VCR2”.

English

86