Hitachi DZMV550A Replacing Disc in Round DVD Holder, When the Hinge of Round DVD Holder Comes OFF

12

REPLACING DISC IN ROUND DVD HOLDER

1 Open SIDE A of the Round DVD Holder, and replace the disc in the holder with the SIDE A mark or label surface facing up, taking care not to touch the disc surface.

2 Close SIDE A of the Round DVD Holder, and push it to lock the release levers at positions (3).

	3
OPEN marks
SIDE A mark side or	3
Label surface

SIDE A mark

12

WHEN THE HINGE OF ROUND DVD HOLDER COMES OFF

1 Push the hinged portion of the holder piece marked SIDE A with thumb and middle finger, and warp it in the direction of arrows (4).

SIDE A mark side 4 Hinged portions

2 Fit the hinged portion of the other holder piece into the warped hinge portion.

Note:

•Handle the disc carefully so that no scratch, dirt, fingerprint or dust adheres to the recording/playback surface.

•When not using the Round DVD Holder, store it in case: Do not leave a bare holder as is.

•Be careful of drop or impact: If you drop the Round DVD Holder, the disc may pop out.

•Do not subject the Round DVD Holder to force.

English

Approx. 90°

12

DISC CLEANING

Use a soft, dry cloth to lightly wipe off any dust, dirt, etc. adhering to disc, as shown in the figure. Never use solvent. Do not use thinner, water, anti- static spray, etc. to clean disc.

Use soft cloth to clean from inner to outer circumference in axial direction.

82