Hitachi DZMV550A, DZMV580A instruction manual Playing Back

Playing Back

Before You Begin

•Insert a disc or card recorded on this DVD video camera/recorder (P. 49, 50).

•Turn the DVD video camera/recorder on (P. 48).

PLAYING BACK

Tilt up/down and to left/ right to select, and then press Ato designate.

1 Press Abutton in the recording pause status.

The DVD video camera/recorder will enter the playback mode, and the scene you have recorded last will be played back. (For “scene”, see P. 105 and “Terminology”, P. 160.)

When playback is finished, the DVD video camera/recorder will enter the pause status at the last image on disc.

If the playback pause status continues for as long as 5 minutes, the DVD video camera/ recorder will automatically return to the recording pause status.

2 Press the Cbutton.

123

Note:

•If the LCD monitor is open during playback of movie,

playback sound will be heard from the speaker. Adjust the sound volume using the volume control buttons (S, R).

•To temporarily stop playback, press the Abutton. Press the Abutton again to restart playback.

•Even if you stop playback midway and immediately start recording again, the new image will be recorded after the last scene on disc or card (the previous images will not be overwritten).

•Image data edited on PC or certain types of image data may not appear on this DVD video camera/recorder.

•Image data recorded on another camcorder may not be playable on this DVD video camera/recorder.

•Depending on the amount of data to be played back, it may take some time for the playback image to appear.

•Do not operate the power switch or remove the card while the ACCESS/PC or CARD ACCESS indicator is lit or blinking: Doing so may damage the card or the data on card.

Playback will stop, and recording pause status will be restored.

English

58