Hitachi DZMV550A, DZMV580A instruction manual Switching the information display mode, Lpcm

English

15.Movie recording quality		16.Remaining space on disc/card*6
(only when using disc) (P.96)		REM XX MIN*7	: Remaining recordable
XTRA	: Best quality (only when using DVD-		minutes during movie
	RAM disc)	REM XX*8	recording
LPCM	: Best audio quality (only when using		: Number of remaining
	DVD-R disc)		recordable still images during
FINE	: High quality		still recording
STD	: Standard quality	17.Remaining battery level (P.42)
Still recording quality
		w(full charge)
(only when using card) (P.97)
		x
FINE	: High quality
		y
NORM	: Standard quality	z(low remaining charge)
ECO	: Number of recordable stills is	18.Brightness/Color density of LCD screen or
	prioritized
		Volume (P. 58, 101)

:

The volume can be adjusted during external input and playback.

*1 EIS cannot be used when recording stills on DZ-MV580A.

*2 Not displayed on DZ-MV550A. Displayed on DZ-MV580A only when a DVD-RAM disc is used in the movie recording mode.

*3 Not displayed on DZ-MV550A.

*4 When no disc or card is in the DVD video camera/recorder, or disc has not yet been initialized, a write-protected disc or locked card, or a disc or card with no remaining space, has been inserted.

*5 When a disc or card that cannot be used in this DVD video camera/recorder is inserted

*6 No remaining time or number will be displayed with a protected disc or locked card, or finalized DVD-R disc.

*7 In XTRA mode, possible recording time may be longer than the displayed time.

*8 The displayed number of recordable stills is for reference: This number may not decrease, depending on the recording conditions (not displayed with a DVD-R disc).

●Switching the information display mode

You can switch the display mode of on-screen information:

Press the DISPLAY button.

The full and minimum display modes will alternate.

• Full display mode: All types of information will appear.

• Minimum display mode: The recording mode (see 1 on page 52) and recording status (see 12 on page 52) will appear. If the

DVD video camera/recorder has warning information, a warning message will appear.

Note:

The DVD video camera/recorder does not record the date and time as a part of image. However, this information during recording will be recorded with image as data which can be checked on Disc Navigation screen during playback (see “Information Display During Playback” on page 62).

54