Hitachi DZMV580A, DZMV550A instruction manual Changing Setting of Demonstration, 159

Changing Setting of Demonstration

This DVD video camera/recorder has versatile functions, including special effects.

Referring to the procedure on page 43, connect the DVD video camera/recorder, AC adapter/charger and power cable to power the DVD video camera/recorder from AC outlet.

1 Press the MENU button.

Note:

2

3

Choose “Initial Setup”, “Demo Mode”, and then press the Abutton.

Use the joystick to choose the desired option, and then press the Abutton.

I n i t i a l	Setu p
Beep
Power		Save
Re c o r d		LED
Language			A u t o
Demo Mode			O f f
Reset			S t a r t
ENTER	RETURN		RAM

•You can press the DISC NAVIGATION button to stop demonstration midway: The Disc Navigation screen will appear.

•If you choose “Auto”, the demonstration will not start if a disc is loaded with the power switch set to “OVIDEO” or “NPHOTO”, or a card is loaded with the power switch set to “ PPHOTO”.

•The demonstration function will not work when the DVD video camera/recorder is connected to PC.

•While the demonstration is being given, the recording indicator will blink.

Auto: To start demonstration approx. 3 minutes after turning the DVD video camera/recorder on.

Off: To set demonstration to off.

Start: To start demonstration immediately.

Press the MENU button again: The menu screen will disappear.

To stop the demonstration midway, press the C button.

The demo mode will end when the DVD video camera/recorder is turned off or the DISC EJECT button is pressed down.

English

159