BASIC OPERATION
Power On/Off
Now, turn On the main power to the unit. Make sure that the power cord is plugged into the wall socket.
To turn On the power of the unit:
1.Press the Main Power switch on the unit.
The Indicating Lamp will illuminates in Red (Standby mode).
2.Press Sub Power button either on the control panel or on the remote control.
•The colour of the Indicating Lamp turns into Blue, and the image will be displayed on the screen.
To turn Off the power of the unit:
1.Press Sub Power button either on the control panel or on the remote control.
•The image disappears from the screen and the Indicating Lamp turns into Red (Standby mode).
2.Press Main Power switch to completely turn Off the power of the unit.
Main Power switch (located on the bottom surface)
Sub Power button
Sub Power button
ENGLISH
The Indicating Lamp Status Check
Indicating Lamp | Power Status | Power Switch Status | View Timer Status | ||
Status | |||||
|
|
|
| ||
Off | Off | Main power | Off | — | |
Red | Standby mode | Main power | On | — | |
Sub power | Off | ||||
|
|
| |||
Blue*1 | On | Main power | On | — | |
Sub power | On | ||||
|
|
| |||
Pulsing Blue | Power Save mode*2 | Main power | On | — | |
Sub power | On | ||||
|
|
| |||
Orange*3 | — |
| — | Whilst TV has View Timer | |
| set up. | ||||
|
|
|
| ||
|
|
|
| Whilst operating a | |
Green | — |
| — | programme which has set | |
|
|
|
| up View Timer. | |
*1 After turning on, the indicating lamp pulses for an instant and then starts lighting. Also, the indicating lamp blinks whilst using remote control.
In case you do not want it to pulse/blink, select “Off” in “LED Mode” from Configuration menu. Refer to 34 for the details.
*2 About Power Save mode, see “Power Save Mode” and “When Following Messages Appear on the Screen” on 72 and 74 for details.
*3 The indicating lamp blinks in orange if the View Timer setting does not have time information.
NOTE
•If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on 74 ~ 76 . It may help you to solve the problems.
•After turning On, it takes several tens of seconds until TV starts up. If selecting “On” in “Quick Start Options” from Configuration menu, you can shorten the processing time. Refer to 34 .
•You can turn On the power only by pressing the Sub Power button during Standby mode.
•Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
•If the power outage occurs whilst using the unit, turn Off the Main Power switch before you leave to avoid sudden power surges when power comes back.
23
Downloaded From
