Adding Coolant, Power Connection, To Plug, Hot

	P R E P A R A T I O N
For Machines Mfg. Since 5/11	P R E P A R A T I O N	13" Heavy 13® Gearhead Lathe

In addition to the reservoirs, we also recommend that you lubricate all other points on the machine at this time. This can be accomplished by following the maintenance schedule on Page 64.

Note: If this lathe was shipped with oil in the reservoirs, do not change that oil until after the test run and spindle break-in procedures.

Adding Coolant

Add the coolant of your choice now. For detailed instructions on where the coolant tank is located and how to add fluid, refer to Coolant System Service on Page 71.

Power Connection

Electrocution or fire may occur if machine is ungrounded, incorrectly connected to power, or connected to an undersized circuit. Use an electrician or a qualified service personnel to ensure a safe power connection.

Once your machine is set up and assembled as previously described in this manual, it is ready to be connected to the power source.

Note About Extension Cords: Using an incorrectly sized extension cord may decrease the life of electrical components on your machine. Refer to Extension Cords on Page 18 for more information.

To connect the power cord to the lathe:

1.Make sure the master power switch is turned to the OFF position, then open the electrical cabinet door.

2.Thread the power cord through the strain relief, and up to the master power switch shown in Figure 20.

Incoming

Power

Strain

Master

Relief

Power

Switch

Figure 20. Location to connect power inside main

electrical cabinet.

3.Connect the incoming hot wires to the upper master power switch terminals, as illustrated in Figure 21.

To Plug	Ground
Hot	Hot
Master
Power
Switch

Figure 21. Power connection at master power switch.

4.Connect the incoming ground wire to the ground terminal on the switch bracket, as illustrated in Figure 21.

-25-

SB specifications

The Southbend 1368,SB is a versatile and robust commercial range designed for professional kitchens that demand high performance, reliability, and efficiency. This model is widely recognized for its solid construction and user-friendly features, making it a preferred choice among chefs and restaurant operators.

One of the standout features of the Southbend 1368,SB is its powerful burners. Equipped with six high-output burners, each producing 33,000 BTUs, this range delivers exceptional cooking power, allowing chefs to boil, sauté, and simmer with ease. The burners are designed with heavy-duty cast iron grates that not only provide durability but also ensure optimal heat distribution across the cooking surface, enhancing culinary results.

The range also includes a spacious oven with a capacity of 40,000 BTUs, which is perfect for baking, roasting, and broiling various dishes. The oven features a thermostat that allows for precise temperature control, ensuring that dishes are cooked to perfection every time. Additionally, the oven's interior is made from stainless steel, which offers excellent heat retention and is easy to clean.

Another notable characteristic of the Southbend 1368,SB is its construction. Built with a heavy-duty stainless steel exterior, this range is not only aesthetically pleasing but also resistant to corrosion and wear. The front, sides, and top are all designed for durability, making it suitable for high-traffic kitchen environments.

In terms of technological advancements, the Southbend 1368,SB is equipped with modular components that can be easily customized to meet specific cooking needs. This flexibility allows operators to configure the range for various cooking tasks, accommodating everything from grilling to frying.

Safety is also a significant consideration in the design of the Southbend 1368,SB. The range includes flame failure safety devices that automatically shut off the gas supply in case of a flame-out, providing peace of mind for operators during busy service times.

In summary, the Southbend 1368,SB is a powerful, versatile, and durable commercial range that brings together high-performance cooking capabilities and user-friendly features. With its robust burners, spacious oven, and heavy-duty construction, it is an ideal choice for any professional kitchen looking for reliability and efficiency in their cooking equipment.

Southbend SB Adding Coolant, Power Connection, To connect the power cord to the lathe, To Plug

Models: SB