O P E R A T I O N

 

13" Heavy 13® Gearhead Lathe

For Machines Mfg. Since 5/11

 

 

 

Setting Spindle Speed

Selecting one of the 8 spindle speeds available is a combination of configuring the spindle range lever and the spindle speed lever shown in Figure 66.

Speed

Lever

Spindle Range

Lever

Figure 66. Spindle speed controls.

The spindle speed and range levers control the gear configuration in the headstock to produce the selected spindle speed. Refer to the chart below for the available spindle speeds available.

Low Range (RPM)

High Range (RPM)

80

488

127

772

200

1245

320

2000

ALWAYS make sure the spindle is completely stopped BEFORE using the headstock control levers to make changes. If the spindle is rotating when attempting to change the spindle speed, the headstock gears will suffer damage!

Operating the lathe at spindle speeds higher than 350 RPM when the high (H) gearbox range is selected could result in gearbox damage. Always use spindle speeds of

350 RPM or lower when using the high (H) gearbox range.

Configuration Examples

Using the controls on the lathe, follow along with these two examples for setting the spindle speed to gain a better understanding of this task.

Setting Spindle Speed of 200 RPM

1.Make sure the spindle is completely stopped and the spindle lever is in the OFF (middle) position.

2.Move the spindle range lever to the right so that the arrow on top of its hub points toward the L (low) label (see the illustrated in Figure 67).

Note: If necessary, use the chuck key to rock the spindle back-and-forth to help mesh the gears as you move the levers.

:

 

 

>

Spindle Range

 

&'

$"

 

 

Lever Set to LOW

$



"

 

 

#

 

 

 

 

 

 

)

 

 

 

 

 

$

 

 

 

 

 

"

$

 

 

 

 

 

"

 

 

 

 

 

"

#

 

 

 

 

 



 

 

 

 

 



$

 

 

 

 

 

%



 

 

 

 

 

$

)

 

 

 

 

 

 

 

 

 

 

"

)

 

 

 

 

 

 



 

 

 

 

 

 

 

 

 

 

 



 

 

 

 

 

&

 

 

 

 

*

 

 

 

"**

 

 

 

Spindle Speed

Lever Set to 200 RPM

Figure 67. Setting the spindle speed to 200 RPM.

3.Move the spindle speed lever so that the 200 on its hub is also pointing at the L label.

Note: You will hear a distinctive click when the spindle speed lever is in the correct position.

The lathe is now set for a spindle speed of 200 RPM.

-50-

Page 52
Image 52
Southbend SB owner manual Configuration Examples, Setting Spindle Speed of 200 RPM

SB specifications

The Southbend 1368,SB is a versatile and robust commercial range designed for professional kitchens that demand high performance, reliability, and efficiency. This model is widely recognized for its solid construction and user-friendly features, making it a preferred choice among chefs and restaurant operators.

One of the standout features of the Southbend 1368,SB is its powerful burners. Equipped with six high-output burners, each producing 33,000 BTUs, this range delivers exceptional cooking power, allowing chefs to boil, sauté, and simmer with ease. The burners are designed with heavy-duty cast iron grates that not only provide durability but also ensure optimal heat distribution across the cooking surface, enhancing culinary results.

The range also includes a spacious oven with a capacity of 40,000 BTUs, which is perfect for baking, roasting, and broiling various dishes. The oven features a thermostat that allows for precise temperature control, ensuring that dishes are cooked to perfection every time. Additionally, the oven's interior is made from stainless steel, which offers excellent heat retention and is easy to clean.

Another notable characteristic of the Southbend 1368,SB is its construction. Built with a heavy-duty stainless steel exterior, this range is not only aesthetically pleasing but also resistant to corrosion and wear. The front, sides, and top are all designed for durability, making it suitable for high-traffic kitchen environments.

In terms of technological advancements, the Southbend 1368,SB is equipped with modular components that can be easily customized to meet specific cooking needs. This flexibility allows operators to configure the range for various cooking tasks, accommodating everything from grilling to frying.

Safety is also a significant consideration in the design of the Southbend 1368,SB. The range includes flame failure safety devices that automatically shut off the gas supply in case of a flame-out, providing peace of mind for operators during busy service times.

In summary, the Southbend 1368,SB is a powerful, versatile, and durable commercial range that brings together high-performance cooking capabilities and user-friendly features. With its robust burners, spacious oven, and heavy-duty construction, it is an ideal choice for any professional kitchen looking for reliability and efficiency in their cooking equipment.