Hitachi L37X01U, L37X01E user manual Try Auto Adjust Stripes appear and some

TROUBLESHOOTING (continued)

Symptom and Check List (continued)

Symptoms		Check list	Page
• The image on the screen is moving			30
in an oblique direction.		• Adjust “Horizontal Clock” and “Clock Phase”.
(RGB mode only)
• The coarse horizontal stripes could			30
be seen in full-display mode.		• Adjust “Horizontal Clock”.
(RGB mode only)
• The part of the image is lacking.
	AAAAA	• Try “Auto Adjust”.	30
(RGB mode only)

•	The horizontal stripes are moving		• Check the Signal status of the PC by pressing	button
	vertically with fl ickering screen.
			on the remote control.
(RGB mode only)
•	When the characters are displayed
	on the whole screen, the vertical	ABCDEFGHIJ	• Try “Auto Adjust”.
	stripes appear and some of the				30
		ABCDEFGHIJ	• If the display condition is not improved with Auto Adjust,
		abcdefgABCDEFGabcd
	characters are blurred.	abcdefgABCDEFGabcd	adjust “Horizontal Clock”.
(RGB mode only)

• When the letter string is displayed in				• Try “Auto Adjust”.
	full-screen, all of the characters on		ABCDEFGHIJ			30
			ABCDEFGHIJ	• If the condition is not improved with Auto Adjust, adjust
	the screen are blurred.	abcdefgABCDEFGabcd
		abcdefgABCDEFGabcd		“Clock Phase” till you get clearest image.
(RGB mode only)
•	When the small patterns are			• Try “Auto Adjust”.
	displayed on the screen, the entire					30
	screen is fl ickering.			• If the condition is not improved with Auto Adjust, adjust “Clock
				Phase” till you get fl icker-free display.
(RGB mode only)
•	Image cannot be displayed in the			• Press	button to check if the input signal of the	30 , 77
	correct position.			displayed image is compatible with the specifi cation of the
						79
(RGB mode only)				television.

76

Downloaded From TV-Manual.com Manuals