Hitachi L37X01U, L37X01E user manual Function Menu Operation, Basic Mode

FUNCTION MENU OPERATION

Basic Mode

This can access to various kinds of useful features, such as EPG and

FUNCTION

timers. If you press button on remote control at normal mode, the following menu appears.

Function Menu

Favourite

Programme Search

Timers

Lock & Rating

Common Interface

Zoom

Stop Timer Event

	Selected Items					Setup hint
	Favourite				This gives access to Favourites page which allows you to set
					a channel as Favourite. See 55 to set as favourite channels.
			Channel Category		You can search for programmes.
					When you select “Programme Search” and press OK button, Search
					Condition screen is displayed.
	Programme		Programme Type		Select a search condition (Category / Programme Type / Date) by using
					button, and select the value of each items by using ◄► button.
	Search
					After setting the search condition, select		Search	.
				Date	In case that time is not acquired from		DTT broadcast,	or no
					channel is stored in DTT channel list, this is not available.
					(This is available only in DTT mode.)
					This reminds you that the desired programme is about to
					start even whilst you are watching another channel. This
			Programme Timers		is available only if TV obtains the current time information
					from DTT broadcasting.
					See 53 for the detailed.
				--min.
		Off Timer		30min.	This function automatically sets the power to Standby
				60min.
					mode when the selected time period has elapsed.
				90min.
				120min.
					This function automatically sets the power from standby
		On Timer		--h--m	mode to On when the specifi ed time period has elapsed.
					Input the desired time within the range of 00h01m to
					11h59m by using	button on the remote control.
				DTT	Select if the date and time information is acquired
					automatically.
	Timers				DTT: The date and time information can be acquired from
				Teletext	DTT signal automatically.
		Auto Clock			Teletext: The date and time information can be acquired
					from analogue Teletext automatically only when
					the channel number selected at “Teletext
				Off*	Position” is selected.
					Off: Set the current date and time at “Date” and “Time” menu.
					When using the date and time information acquired from
			Teletext Position		analogue Teletext, select one of the channel numbers
					which corresponds to analogue Teletext with ◄► button.
				Date	You can set the current date and time manually here
					when “Off” is selected at “Auto Clock”. When “DTT” or
				Time	“Teletext” is selected at “Auto Clock”, the current date and
					time acquired automatically are displayed.
					If the time information in Programme Information, Electronic
		Time Offset		-3~+3	Programme Guide (EPG), or the current time is incorrect,
					the correct time can be set in 1-hour steps.
44					It cannot be changed if you do not have time information.
Downloaded From TV-Manual.com Manuals