Hitachi P50H401, P55H401 Remote Control for Set-Top Box/Satelite Receiver Functions

The Remote Control for Set-Top Box/Satelite Receiver Functions

OPERATING THE PRECODED FUNCTION FOR YOUR SET-TOP-BOX/SATELLITE RECEIVER.

This remote is designed to operate different types of set-top-box/satellite systems. You must first program the remote to match the remote system of your set- top-box/satellite systems (refer below for pre-codes).

1.Turn ON your set-top-box/satellite systems.

2.Aim the remote control at the front of your set-top- box/satellite systems.

3.To switch to set-top-box/satellite (STB) pre-coded mode, press and release the SAT button.

4.Hold down the SAT button on the remote and enter the two digit preset code that matches your set- top-box/satellite receiver, as shown below. Release the SAT button.

5.Aim the remote at the set-top-box/satellite receiver and press the POWER button. The remote will turn off your set-top-box/satellite receiver when the correct two digit preset code is entered. When this occurs, the remote control is programmed for your set-top-box/satellite receiver. If the set-top-box/satellite receiver does not turn off, try a different two digit preset code.

6.The remote will now control your set-top-box/satellite receiver.

NOTE: 1. If your set-top-box/satellite receiver cannot be operated after performing the above procedures, your set-top- box/satellite receiver code has not been precoded into the remote.

2.In the unlikely event that your set-top- box/satellite receiver cannot be operated after performing the above procedures, please consult your set-top-box/satellite receiver operating guide.

3.The remote control will remember the codes you have programmed until the batteries are removed from the remote control. After replacing the batteries repeat the entire programming procedure as stated above.

￿SAT (Set-Top-Box/Satellite) button

This button allows the remote to control your set- top-box/satellite receiver by setting it to SET-TOP- BOX/SATELLITE mode.

￿PRE-CODED SET-TOP-BOX/SATELLITE RECEIVER buttons

These buttons transmit the chosen pre-coded set- top-box/satellite codes.

￿EXCLUSIVE TV buttons

These buttons are for operating the TV.

￿

￿

￿

￿

￿

￿

SATELLITE BRAND	CODES
2006 DIRECT TV	09
ECOSTAR	03
HITACHI	00
HUGHES	04
RCA	01
SONY	02
SET TOP BOX BRAND	CODES
PANASONIC	05
RCA	06
SAMSUNG	07
ZENITH	08
MY SATELLITE RECEIVER/
SET TOP BOX CODE IS: _________________________

NOTE: Refer to instruction manual of the set-top- box/satellite receiver for operation of the buttons exclusively for the set-top- box/satellite receiver.

The Remote Control

29