CONTROLS — Models LX40H & LX40C (Fig. 4)
|
| ON |
ON | OFF | LX40 WASH |
|
| LOW |
PRIME | PROGRAM | |
DETERGENT | SANITIZER | |
CALL SERVICE
°F |
|
°C | RINSE |
| |
RINSE AGENT | ADD |
LIGHT
NORMAL
HEAVY
DELIME
CYCLEWASH
SELECT | PRIME | DELIME |
Models LX40H & LX40C
Fig. 4
Operating Models LX40H & LX40C
DO THIS | DISPLAY SHOWS | REMARKS |
Press ON. | Two counts of "00000" to | Dishwasher performs self check. This takes |
| "99999", then model | |
| number. |
|
|
|
|
| FILL displayed when | Dishwasher fills with water; detergent is |
| machine is filling. | added automatically. When filled, pump |
|
| turns on for 10 seconds. |
| WAIT displayed when | If WASH is pressed during a fill cycle, a wash |
| booster is preheating. | cycle will begin at the end of the fill cycle. |
| This preheat could take |
|
| up to 8 minutes. | If door is opened during a fill cycle, the fill |
|
| will stop. After door is closed, the process |
|
| continues where it stopped. |
|
| If beeper sounds and machine will not fill, |
|
| turn circuit breaker off, then on, and try |
|
| again. If problem persists, contact your |
|
| local Hobart Service Office. |
|
|
|
| When filled, ON lit and | Machine will maintain a READY state. |
| READY displayed. | Heat is maintained in both booster and/or |
|
| sump. |
|
|
|
– 16 –
