Hobart LX18H, LX18C, LX40C, LX30H, LX30C manual Do This, Display Shows, Remarks

Models: LX18 LX30C LX30H LX40C LX30 LX18C LX18H

1 28
Download 28 pages 40 Kb
Page 13
Image 13
DO THIS

Operating Models LX18, LX18C, LX18H, LX30, LX30C, and LX30H Dishwashers

DO THIS

DISPLAY SHOWS

REMARKS

Press ON.

Model number.

Dishwasher performs self check. This takes

 

 

5-10 seconds.

 

 

 

 

FILL lit and sump

Dishwasher fills with water. When filled,

 

temperature displayed

pump turns on for 10 seconds.

 

when machine is filling.

 

 

 

If door is opened during fill cycle, fill will

 

 

stop. After door is closed, the process

 

 

continues where it stopped.

 

FILL flashes when booster

 

 

is preheating on models

If WASH is pressed during a fill cycle, a

 

LX18H and LX30H. This

wash cycle will begin at end of fill cycle.

 

preheat could take up to

 

 

8 minutes.

If beeper sounds and machine will not fill,

 

 

turn circuit breaker off, then on, and try

 

 

again. If problem persists, contact your

 

 

local Hobart Service Office.

 

 

 

 

When filled, sump

When filled, machine will maintain a

 

temperature is displayed.

READY state. Heat is maintained in both

 

 

booster and/or sump.

 

 

 

Open door; slide rack of

Sump temperature.

If your Model LX30 Series is equipped with

dishes into dishwasher

 

the optional detergent pump, detergent will

and add detergent.

 

be added automatically during wash cycle.

Close door.

 

 

 

 

 

Press WASH.

WASH lit; sump tempera-

Machine initiates a wash and rinse cycle.

 

ture displayed during

If door is opened during wash cycle, cycle

 

wash cycle.

will restart from beginning when door is

 

 

closed.

 

RINSE lit; rinse tempera-

If door is opened during rinse or drain cycle,

 

ture displayed during

cycle will continue at point where door was

 

rinse cycle.

opened upon closing door.

 

 

If OFF is pressed during cycle, machine will

 

 

drain and shut down.

 

 

 

When cycle is complete,

Sump temperature.

Machine will drain and shut down if the

reload machine for next

 

programmed idle shutdown time is reached.

wash/rinse cycle, or, if

 

 

not in use, machine will

 

 

maintain READY mode.

 

 

 

 

 

At end of day, press OFF.

Display shut down.

When OFF key is pressed, machine will

 

 

drain and shut down.

 

 

 

– 13 –

Page 13
Image 13
Hobart LX18H, LX18C, LX40C, LX30H, LX30C manual Do This, Display Shows, Remarks