Operating Models LX40H & LX40C (Continued)
DO THIS | DISPLAY SHOWS | REMARKS |
Open door; slide rack of | READY. |
|
dishes into dishwasher. |
|
|
Close door. |
|
|
|
|
|
Press WASH. | WASH lit and sump | Machine initiates a wash and rinse cycle. |
(Before you press WASH, | temperature displayed |
|
you can change the cycle | during wash cycle. | If door is opened during wash cycle, cycle |
selection if desired. See |
| will restart from beginning when door is |
READY MODE below.) |
| closed. |
| RINSE lit and incoming | If door is opened during drain or rinse cycle, |
| water temperature | cycle will continue at point where door was |
| displayed during rinse | opened upon closing door. |
| cycle. |
|
|
| If OFF is pressed during the wash/rinse |
|
| cycle, the machine will drain and shut down. |
|
|
|
When cycle is complete, | READY. | Machine will drain and shut down if the |
reload machine for next |
| programmed idle shutdown time is reached. |
wash/rinse cycle, or, if |
|
|
not in use, machine will |
|
|
maintain READY mode. |
|
|
|
|
|
At end of day, press OFF. | Display shut down. | When OFF is pressed, machine will |
|
| drain and shut down. |
|
|
|
Ready Mode
When the dishwasher is in the READY mode (a cycle is not running), the selected cycle (LIGHT, NORMAL, HEAVY) is illuminated. If the cycle selection is not locked, you can change the selection by pressing CYCLE until the desired cycle is lit. If cycle selection is locked, there will be no response when CYCLE is pressed.
– 17 –