PROGRAMMABLE VARIABLES AND RECOMMENDED SETTINGS — MODELS LX40H & LX40C
The following functions of the dishwasher are programmable. The chart below shows the variables that may be programmed for each function and the recommended setting for each.
|
|
| RECOMMENDED |
FUNCTION | PROGRAMMABLE VARIABLES | SETTING | |
Wash Setpoint | H Models: | 160°F - 170°F | 165°F |
| C Models: | 130°F - 150°F | 130°F |
Booster Setpoint | 180°F - 199°F | 190°F | |
Temperature Display Mode | °F; °C |
| °F |
Sanitizer Duty Cycle (LX40C Only) | OFF; 1 - 10 (In steps of 1) | 40% | |
Detergent On Time | OFF; 1 - 30 Seconds (In steps of 1) | 7 Seconds | |
Rinse Agent Duty Cycle | OFF; 1 - 10 (In steps of 1) | 70% | |
Idle Shutdown Time | 1 - 6 Hours (In steps of 1) | 4 Hours | |
Cycle Selection (Lock/Unlock) | Lock; Unlock | Unlock | |
Default Cycle | Light; Normal; Heavy | Light | |
Delime Counter Preset | *OFF; 500 - 3000 Cycles (In steps of 25) | ***1500 Cycles | |
Detergent Prime Time | **25 - 75 Seconds (In steps of 1) | 35 Seconds | |
Rinse Agent Prime Time | **25 - 75 Seconds (In steps of 1) | 35 Seconds | |
Sanitizer Prime Time | **25 - 75 Seconds (In steps of 1) | 35 Seconds | |
Heavy Wash Time | 100 - 200 Seconds (In steps of 1) | 156 Seconds | |
Heavy Rinse Time | Normal = 10 Sec.; Exten. = 20 Sec. | Normal | |
*Disabled if OFF is programmed. Factory Setting is 1500 Cycles.
**Not available if pump is turned OFF.
***Determined by water condition.
PREPARATION — ALL MODELS
Make sure the coarse (Fig. 5) and fine (Fig. 6) strainers are in place and free of debris. Check both wash arms (all models) and rinse arms (models LX30, LX30H, LX30C, LX40H & LX40C only) to make sure they spin freely and are not clogged.
Coarse Strainer
Model LX30
Fig. 5
Fine Strainer
Model LX30
Fig. 6
– 20 –
