Hobart Welding Products OM-925 217 694A manual Specifications, VAC Model

SECTION 3 − SPECIFICATIONS

3-1. Specifications

A. 115 VAC Model

Rated Welding	Amperage	Maximum Open-	Amperes Input at			Weight	Overall
			Rated Load Output
		Circuit Voltage		KVA	KW
Output	Range		115 V, 60 Hz, Single-			W/ Gun	Dimensions
		DC
			Phase
							Length: 19-1/2 in
90 A @ 19 Volts DC,			20	2.90	2.50	57 lb	(495 mm)
20% Duty Cycle							Width: 10-5/8 in
	25 − 140	28				(26 kg)
63 A @ 21 Volts DC,							(270 mm)
			15*	2.20*	1.77*
20% Duty Cycle*							Height: 12-3/8 in
							(314 mm)
	Solid/	Flux Cored	Aluminum		Wire Feed Speed Range
Wire Type	Stainless
And Diameter	.023 − .035 in	.030 − .035 in	.030 in	50 − 740 IPM (1.3 − 18.8 m/min) At No Load
	(0.6 − 0.9 mm)	(0.8 − 0.9 mm)	(0.8 mm)	40 − 700 IPM (1.0 − 17.8 m/min) Feeding Wire

* CSA Rating

B. 230 VAC Model

Rated Welding	Amperage	Maximum Open-	Amperes Input at			Weight	Overall
			Rated Load Output
		Circuit Voltage		KVA	KW
Output	Range		230 V, 50/60 Hz,			W/ Gun	Dimensions
		DC
			Single-Phase
							Length: 19-1/2 in
130 A @ 20 Volts							(495 mm)
DC, 30% Duty Cycle						68 lb	Width: 10-5/8 in
At 60 Hz Input − 20%	25 − 180	30	20	4.60	3.75
						(31 kg)	(270 mm)
Duty Cycle At 50 Hz
Input							Height: 12-3/8 in
							(314 mm)
	Solid/	Flux Cored	Aluminum		Wire Feed Speed Range
Wire Type	Stainless
And Diameter	.023 − .035 in	.030 − .045 in	.030 − .035 in	50 − 740 IPM (1.3 − 18.8 m/min) At No Load
	(0.6 − 0.9 mm)	(0.8 − 1.2 mm)	(0.8 − 0.9 mm)	40 − 700 IPM (1.0 − 17.8 m/min) Feeding Wire

Return To Table Of Contents OM-925 Page 9