Manuals / Home Automation / Household Appliance / Indoor Furnishings

Home Automation HOME AUTOMATION Emergency Keys, Fire Alarm Activated, Gas Alarm Activated, Page

Models: INC. Omni IIe HOME AUTOMATION

1 98

Download 98 pages 54.77 Kb

Page 18

Fire Alarm Activated

For more information on the digital and voice dialer - See Digital Dialer and Voice Dialer.

•The system continues to sound all alarms and flash the flashing light for 1-30 minutes after the alarm is activated.

•After a 1-30 minute period, the sounder is turned off, and the alarm system resets itself. The console beeper stays on. If a zone is tripped after a reset, the sounder will again be activated, and the dialer will again dial out.

At any time, the alarm system can be turned off at the console.

Fire Alarm Activated

When the fire alarm is activated by the smoke/fire detector(s), the alarm responds exactly as described under Burglar Alarm Activated, except:

•The console display reads, "FIRE ALARM! ZONE NAME TRIPPED".

•The sounder will activate in a 3 pulse temporal pattern to distinguish the fire alarm from the burglar alarm.

The fire alarm takes priority over the burglar alarm, however, if a gas alarm is already active, it will not override the gas alarm.

NOTE: If multiple alarm types occur, such as both Fire and Police, the display will alternate between the alarm types.

Gas Alarm Activated

When the gas alarm is activated, the alarm responds exactly as described under Burglar Alarm Activated, except:

•The console display reads, "GAS ALARM! ZONE NAME TRIPPED".

•The sounder will pulse on - off - on, then an extended off period to distinguish it from the burglar or fire alarm.

The gas alarm takes priority over the burglar alarm, however, if a fire alarm is already active, it will not override the fire alarm.

Emergency Keys

Emergency alarm conditions can be activated through the console. These conditions (Fire, Police, and Auxiliary) are initiated with the simultaneous depression of two keys for approximately 1-second.

OMNI

POL

FIRE

AUX

NOTE: The Emergency keys are always armed. The Fire and Auxiliary emergency alarms are silenced by pressing the ' * ' key. To cancel a Police emergency alarm you must press the Off key and enter your code.

Page 10

Image 18

Home Automation HOME AUTOMATION, INC. Omni IIe owner manual Emergency Keys, Fire Alarm Activated, Gas Alarm Activated, Page

Contents

HOME AUTOMATION, INC Document Number 20R00-50Rev. JanuaryCopyright 2001-2006Home Automation, Inc All Rights ReservedSECURITY SYSTEM OPERATION INTRODUCTIONOVERALL DESCRIPTION ContentsCONTROL PC Access TELEPHONE CONTROLSETUP CANADIAN INDUSTRY CANADA NOTICE UNDERWRITERS LABORATORIES REQUIREMENTSFEDERAL COMMUNICATION COMMISSION NOTICE APPENDIX A - DIAL OUT PLANNERPage INTRODUCTION Underwriters Laboratories UL ListingPage 1- OFF OVERALL DESCRIPTIONConsole Operation 2- DAY6- UP ARROW Normal Top-LevelDisplayDisplay Menus 7- CONSOLE LEDTrouble Beeps Error BeepsMain Menu To silence the beeper, press the * keyAreas Omni IIe MaintenanceCancel Confirmation Beep0 = OFF SECURITY SYSTEM OPERATIONArming the Security System 1 = DAY2 = NIGHT Using Shortcut Keys6 = NIGHT DLY NIGHT DELAY 3 = AWAYBypassing Zones 9 = RESTOREQuick Arm Restoring ZonesBurglar Alarm Activated What To Do When You Come HomeWhat Happens When the Alarm is Activated #=GOTOEmergency Keys Fire Alarm ActivatedGas Alarm Activated PageAlarm Cancel Duress Code Entered or Duress Alarm ActivatedAlarm Reset Police EmergencyMaster Code Trouble IndicationsCodes PageArea Arming Panic SwitchesDuress Code Manager CodeGOTO Area PageTesting Your System PageAbout UPB Control CommandsCONTROL PageHAI Lighting Control HLC Format When set to UPB, the Omni IIe controller canRoom Controller LED Indicators About RoomsAbout CentraLite About Lutron RadioRAAbout House Controllers PageAbout When set to RadioRA, the Omni IIe controller canAbout ALC House CodesControlling Units Unit NumbersScrolling Through Names Omni IIe Unit NumbersOperation Configuring Lighting Scenes in an HLC RoomStep Controlling CentraLite Units PageControlling RadioRA Units Controlling ALC or X-10UnitsPage Ramp Command ALC Controlling Compose UnitsPage Status of a Unit Timed CommandsScene Command Compose Internal FlagsWHEN ALL ON LINK 50 ON WHEN ALL OFF LINK 50 OFF Controlling OutputsAll On / Off WHEN ALL ON PHANTOM BUTTON 16 ONLeviton Scene Control All Lights OnAll Off SceneScene On Command Scene CommandsScene Set Command Scene Off CommandExecuting Phantom Buttons Setting a Link Lighting ScenesActivating and Deactivating Links Executing CentraLite ScenesLeave for Work Button Temperature ControlButtons Dinner for Two ButtonHAI RC-SeriesThermostats PageProgrammable Energy Saver Modules PESMs PageThe following control actions are allowed on PESMs PageIMPORTANT NOTES Freeze AlarmsIndoor and Outdoor Temperature PageHumidity Temperature AlarmsTemperature Control of Appliances PageStatus Configuring HLC DevicesConfiguring HLC Devices using an Omni Console PageStep Operation Setup Mode for HLC DevicesStep Operation Step OperationRING - RINGING ONHK - ON HOOKOFFHK - OFF HOOK DEAD - DEAD PHONE LINEEvent Log Show Events PageMessages Show MessagePage Say Message Log MessageClear Message Phone MessageMSGNAME ENTER MESSAGEPage In-HousePhones TELEPHONE CONTROLTelephone Interface Remote PhonesMain Menu Phone Access Denied - Remote LockoutAlternate Method Page2 - Security 5 - Temperature1 - Control 3 - Button6 - Status When an HAI Communicating Thermostat is enteredWhen a Programmable Energy Saver PESM is entered 7 - Events9 - Good-Bye When the HAI Two-WayAudio Module is being used8 - Phone Panic Button over the Phone # # # # # #Voice Dialer Emergency Dial-OutDigital Dialer How the Omni IIe Voice Dialer WorksEntering the Code What the Omni IIe Voice Dialer DoesWhat You Hear - If Your Omni IIe Calls You PageBuilt-InEthernet Port PC AccessConnecting to Network via PC Access Omni IIe Ethernet Connections192.168.0.101 Hub or HAI Omni IIeRouter Local NetworkDynamic DNS Controlleri.e Local / Wide Area Networki.e PageAccess Areas SETUPSet Up Codes Authority LevelTIME Set Up TimeDuress Code Page2 = Show Programs Advanced Control Programming ACP1 = Add Programs PageMenu PageEdit Programs 3 = Delete All ProgramsPage Edit Programs When Times ProgramsPage Control Unit / Switch Press Event Buttons Button and Event ProgramsPage Omni IIe Corresponding Switch TableSwitch UPB 6-ButtonKeypadZone Event Buttons All On/Off Event ButtonsPage X-10Event Buttons Alarm Event ButtonsUPB Link Event Buttons PageMiscellaneous Event Buttons Message Event Buttons Pro-LinkPage Program Control Commands Edit Program CommandSwitch Press Event Buttons CentraLite PageWHEN U1 SW UNIT 1 LED 3 ON Unit Toggle CommandProgram Security Commands WHEN LINK 1 ON Porch Light STATUSProgram Video Commands Program Button CommandsProgram All On / All Off Commands Program Temperature CommandsProgram Control Conditions Program Message CommandsEdit Program Condition PageProgram Time Clock Conditions Program Security Mode ConditionsProgram Zone Conditions Program Other ConditionsSELECT CONDITION NEVER PageRemote Commands Set Up DialTelephone Access Answer Outside CallDial Order Dial Out NumberDial Out Numbers PageExit Delay Set Up ArmingEntry Delay Audible Exit DelayEnable Auto Bypass Set up MiscellaneousEnable Quick Arm All On For AlarmHouse Codes 1-4Format Enable Freeze AlarmFlash For Alarm FORMATHouse Codes 1-4All On Time ClocksPage Daylight Savings Latitude, Longitude, and Time ZoneZONE NAME PageNUMBER Controller IP AddressController Port Number DESCRIPTIONSet Up Names Encryption KeyPage SET UP VOICE 1=CTRL 2=ZONE 3=BTTN ↓ Set Up VoiceSet Up Address 4=CODE 5=TEMP 6=AREA 8=MSG↑UNDERWRITERS LABORATORIES REQUIREMENTS FIRE ESCAPE PLANNINGPage FEDERAL COMMUNICATION COMMISSION NOTICE PageCANADIAN INDUSTRY CANADA NOTICE IF YOU HAVE TROUBLE WITH YOUR PHONESPage APPENDIX A - DIAL OUT PLANNER Omni IIe Voice Dial-OutPlannerPage INSTRUCTIONS TO CALLED PARTY PageCODE CHAR APPENDIX B - TEXT DESCRIPTION CHARACTER CODESCODE CHAR CODE CHARDESCRIPTION APPENDIX C - VOICE DESCRIPTION CODESCODE CODECODE CODEDESCRIPTION DESCRIPTIONCODE CODEDESCRIPTION DESCRIPTIONCODE DESCRIPTION CODE DESCRIPTIONCODE DESCRIPTION PagePage NOTE TO INSTALLER HAI New Orleans, LA U S A