The
Next, select the message to be sent. You may enter the message number followed by the ' # ' key to send that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to send the selected message:
MSGNAME |
|
ENTER MESSAGE: | ↓ |
The message is sent out through the specified
Carriage returns and line feed characters are not automatically appended to the end. To send ASCII control as part of the message, use the caret "^" character in the message. This character specifics that the next character is to be interpreted as an ASCII control character, such as "^M" to represent a carriage return.
Other useful sequences would be "^J" for a line feed character and "^G" for a bell character. To include an actual "^" character in the message, enter it twice as in "^^".
Each message can be up to 15 characters long. To send a longer message, simply program two messages to be sent one after the other.
When receiving an ASCII message that is over 15 characters, Omni IIe only processes the last 15 characters of the message.
•One or more characters have been received followed by 100 ms of silence
•One or more characters followed by a carriage return character are received
•One or more characters followed by a line feed character are received
It is not necessary to enter the terminating carriage return or line feed character as part of the message name.
Page 41
