-Selecting 3 (AREA) allows you to specify that the event button is activated only when the specified area is armed or disarmed. You will be prompted to enter the area:
AREA: | 0=ALL ↓ |
ENTER AREA |
The area number should be entered followed by the ' # ' key, or the arrow keys may be used to scroll through a list of areas.
WHEN C1 A1 AWAY: 1=DELAY 2=CODE 3=AREA
Zone Event Buttons
Pressing the 3 (ZONE) key allows you to select the event button for a zone activation event. You are first prompted to enter the desired zone number:
ZONE: | ↓ |
ENTER ZONE |
The zone number should be entered followed by the ' # ' key, or the arrow keys may be used to scroll through a list of zones. The desired zone is then displayed and you are prompted to specify the state that activates the event button:
WHEN Front Door:
0=SECURE | 1=NOT RDY |
All On/Off Event Buttons
Pressing the 4 (ALL) key allows you to specify an event button activated by issuing an All On or an All Off command, issuing a Leviton Scene command, or issuing a UPB Link command. You are first prompted to specify whether the event button is for All Lights On, All Off, Leviton Scene, or UPB Link:
ALL
0=OFF 1=ON 2=SCN 3=LINK↓
If area arming is being used, you will be prompted to specify the desired area:
AREA: | 0=ALL ↓ |
ENTER AREA |
If Leviton Scene is selected, you must first specify the scene number:
ENTER SCENE:
Then select the specified command Off, On, or Set.
If UPB Link is selected, you must first specify the link number:
ENTER LINK:
Then select the specified command Off, On, or Set.
Page 60
