Home Automation HOME AUTOMATION, INC. Omni IIe owner manual Button and Event Programs, Page

Button and Event Programs

Selecting 2 (BUTTON), from the "Edit When" menu, sets up a program to be activated when a macro button is executed or an event occurs. The user is prompted to specify the button/event that activates the program:

BUTTON:	#=MENU ↓
ENTER BUTTON

A specific macro button may be activated by entering the button number followed by the ' # ' key, or by using the arrow keys to scroll through a list of buttons.

To program specific event buttons (i.e. Front Door Opens, Security Armed Away, Porch Light Turns On, etc.), press the ' # ' key to bring up a menu of event button types:

BUTTON TYPE

1=CTRL 2=SEC 3=ZONE ↓

4=ALL 5=ALARM 6=X-10 7=MISC 8=MSG 9=SWITCH ↑

After the event button is specified, the display returns to the Edit Program menu.

Control Unit / Switch Press Event Buttons

This Event Button is activated upon the following:

•When the specified Unit is turned on or off

•When the top-rocker or bottom-rocker is pressed on a UPB, RadioRA, or ALC switch

•When a button is pressed on a UPB 6-Button or 8-Button Keypad

•When a button is pressed on a RadioRA Master Control

•When a button is pressed on a ALC 4-Button Scene Switch Module

Press the 1 (CTRL) key to select the "When Command" for a control unit event.

UNIT:
ENTER UNIT	↓

The unit may be selected by entering the unit number followed by the ' # ' key or by using the arrow keys to scroll through a list of unit names. Select the desired unit. Next, you are prompted to specify the event that activates the program:

WHEN Porch Light: 0=OFF 1=ON 2=SWITCH

Press the 0 (OFF) key to select when the unit turns off or press the 1 (ON) key to select when the unit turns on (this program is executed whenever the unit is turned off or on).

Press the 2 (SWITCH) key to select only when the top-rocker or bottom-rocker is pressed at a UPB, RadioRA, or ALC Switch (locally at the Switch) or when a button is pressed on a keypad.

SWITCH:

0=OFF 1=ON 2-11=SW1-SW10

Press "0" to select only when the bottom-rocker (off) is pressed on the Switch. Press "1" to select only when the top-rocker (on) is pressed on the Switch. Press "2-9" (see the Corresponding Switch Table) to select when that button is pressed on a keypad.

Press the ' # ' key to enter your selection.

Page 58