SECURITY SYSTEM OPERATION
Disarming the Security System and Silencing Alarms
Before going any further, you should know how to disarm your security system in the event that the alarm sounds. Turning the system OFF disarms the burglar alarm, resets the fire and emergency alarms, and silences all sirens and sounders.
Press the OFF key. 
OFF 
Now enter your four digit Code. 
1 
1 
1 
1 
That's all there is to it.
Watch the display. The top line will read "DISARM" - The bottom line will read "ENTER CODE", indicating that your option is to enter your code number. For each digit that you press, an "X" will appear indicating that the key has been pressed.
After the
If an incorrect code is entered, the console will beep three times and display
"*** INVALID CODE *** ".
In the event that you make a mistake, press the OFF key again, and then enter your master code again. Practice disarming your system until you are comfortable with this procedure.
NOTES:
¾Panic, Tamper, and Fire zones are always armed, as are the Emergency buttons on the console.
¾In the event that the alarm has been activated, the menu keys and the arrow keys are locked out. You must silence the alarm using the OFF, DAY, NIGHT, or AWAY keys.
Arming the Security System
Now that you know how to disarm the system, here's how to arm the security system. The security menu is used to arm and disarm the security system. To enter the security menu, from the
0=OFF | 1=DAY 2=NIGHT | ↓ |
3=AWAY | 4=VACATION |
5=DAY INST 6=NIGHT DLY 8=BYPASS 9=RESTORE ↑
0 = OFF
The OFF key disarms the security system, resets the fire and emergency alarms, and silences all sirens and sounders.
1 = DAY
The DAY mode is intended for use when someone will occupy the house or business that is being protected. In the Day mode, the perimeter zones (doors and windows) are armed; however, interior motion detectors and interior traps are not armed so that you may move about freely inside. In the Day mode, there will be an Entry Delay on the
Page 6
