Honda Power Equipment HF2620HME, HF2417HTE, HF2415SBE is engaged, the engine stops, stopped, N F N

R

4.34B A

CONTROLS AND INSTRUMENTS EN 21

speed.

–Increasing pressure on the pedal progressively increas- es the speed of the machine.

–The pedal automatically goes into neutral «N» when

released.

–The neutral condition «N» is shown by the lighting of an indicator light (4.10.g).

4.33REVERSE PEDAL

This pedal engages reverse drive in the wheels and modu- lates the machine’s speed.

4.31

4.32

N

F N

4.33

– Increasing pressure on the pedal progressively increases the speed of the machine

–The pedal automatically goes into neutral «N» when released.

–The neutral condition «N» is shown by the lighting of an indicator light (4.10.g).

! WARNING!	Reverse must be engaged only when the machine is
stopped.
NOTE	If one of the drive pedals is used when the parking brake

(4.5) is engaged, the engine stops.

4.34LEVER TO RELEASE THE HYDROSTATIC TRANSMISSION

This lever has two positions as shown on the label:

«A» = Transmission engaged: for all usage conditions, when moving and during cutting;

«B» = Transmission released: considerably reduces the effort required for moving the machine by hand, with the engine turned off.