Honda Power Equipment HF2417HME, HF2417HTE, HF2620HME, HF2415SBE, HF2620HTE, HF2315HME Unattended

EN 32 HOW TO USE

5.4.7UNBLOCKING THE COLLECTOR CHANNEL

Cutting very tall or wet grass, particularly at too high speed, can cause the collec- tor channel to become blocked. Should this happen, it will be necessary to:

–stop forward movement immediately, disengage the blades, stop the engine and remove the key;

–take off the grass-catcher or stone-guard;

–remove the accumulated cuttings, reaching them from the outlet of the collector channel.

! WARNING! This job must only be performed with the engine turned off.

5.4.8“MULCHING” FUNCTION (OPTIONAL)

The “Mulching” cap recycles grass inside the cutting deck, chopping it into fine strands and strewing them evenly on the lawn.

This accessory must be fastened to the rear

plate and used as shown in the relevant 1 instructions.

5.4.9END OF MOWING

When you have finished mowing, disengage the blades, lower the engine speed and return with the cutting deck in the highest position.

5.4.10END OF WORK

Stop the machine, put the accelerator lever in the «SLOW» position and turn off the engine by putting the key into the «OFF» position.

This operation makes the fuel valve automatically close.

! WARNING! Always take out the ignition key if leaving the machine

unattended!