Honda Power Equipment HF2315SBE, HF2417HTE, HF2620HME, HF2415SBE, HF2620HTE, HF2315HME Netic clutch

HOW TO USE EN 33

5.4.11CLEANING AND STORAGE

Put the machine away in a dry place protected from weather and, if possible, cover with a cloth. After each mowing, clean the outside of the machine, empty the grass-catcher and shake it to remove residual grass and earth.

! WARNING! Always empty the grass-catcher and do not leave con- tainers full of cut grass inside a room.

Clean the plastic parts of the body with a damp sponge using water and deter- gent, taking care not to pu water on the engine, the electrical parts or the elec- tronic card located under the dashboard.

IMPORTANT

Never use hose-nozzles or harsh detergents for cleaning the

body and engine!
For washing the inside of the cutting deck
and the collector channel the machine must
be on firm ground with:	1

– the grass-catcher or stone-guard fitted;

– the operator seated;

– the engine running;

– the transmission in neutral;

–the parking brake engaged;

–the blades engaged.

Connect a water hose to the pipe fittings (1) alternating, and run water through for a few minutes each, with the blades turning.

When washing, the cutting deck should be fully lowered.

Then take off the grass-catcher, empty and rinse it, and then put it in a position where it can dry quickly.

➤

HF2620◊••
IMPORTANT	To avoid impairing the efficient working of the electromag-
netic clutch:

–prevent the friction from coming into contact with oil;

–do not direct jets of high-pressure water directly onto the clutch unit;

–do not clean the clutch with petrol.