Honda Power Equipment HF2415SBE, HF2417HTE Transporting, Advice On How To Obtain A Good Cut

EN 36HOW TO USE

! WARNING! Take care when beginning forward movement on sloping ground to prevent the risk of tipping up. Reduce the forward speed before going on a slope, particularly downhill.

! DANGER! Never use reverse to reduce speed going downhill. con- trol of the machine may be lost, particularly on slippery surfaces.

➤HF2•••SBE

! DANGER! Never ride the machine on slopes in neutral gear or with the clutch out! Always engage a low gear before leaving the machine stopped and unattended.

➤HF2•••HME HF2•••HTE

Go down slopes without touching the pedal (☛ 4.32/33) to take advantage of the braking effect of the hydrostatic drive when the transmission is not engaged.

5.6 TRANSPORTING

! WARNING! If the machine must be transported on a lorry or trailer car, use access ramps having proper strength, width and length. Load the machine with the engine turned off, without driver and only pushed by a proper number of people. Lower the cutting deck, engage the parking brake and properly secure the machine to the means of transportation with cables or chains during transportation.

5.7 ADVICE ON HOW TO OBTAIN A GOOD CUT

1.To keep a lawn green and soft with a good appearance, it should be cut regu- larly and without damaging the grass.

2.It is always better to cut the grass when dry.

3.The blades must be in good condition and well sharpened so that the grass is cut straight without any ragged edge that leads to yellowing at the ends.