![TRANSPORT - STORAGE](/images/new-backgrounds/192931/19293173x1.webp)
TRANSPORT - STORAGE
Your boat can be transported by means of a trailer adapted for this purpose (contact your approved Honda dealer for more information).
CAUTION:
•Do not leave objects in the boat which may be blown away or thrown out of the boat during transport.
•The boat must be correctly inflated.
•Do not use the anchor stirrup to hoist your boat.
•Do not use the trailer winch to hoist the boat. It must be used only for securing and launching the boat.
1.Open the drain plug to drain the water from inside the boat.
2.Position the trailer’s rollers to distribute the boat’s load on its floaters. The transom plate
must be bearing on the trailer.
3.Slide the trailer underneath the boat while it is in the water.
4.Finish hoisting the boat using the side towing rings [3].
5.Pull the trailer out of the water.
6.Attach the boat:
SAFETY
E4
•to the trailer winch at the front, using the mooring ring [1],
•to the middle and rear using wide straps [2] laid flat on the floaters and secured to the trailer chassis.
7.Check that the engine is securely fastened to the transom plate.
8.Place the engine in boating position. Position the base on a support provided on the trailer.
STORAGE
At the end of the boating season, wash the entire boat with soapy water. Carefully rinse and allow to dry. Store the boat in a cool dry location. Avoid placing it in areas subject to prolonged exposure to the sun or freezing temperatures. Do not store heavy objects on the folded boat.
TRANSPORT - STOCKAGE
Il est possible de transporter votre bateau à l’aide d’une remorque adaptée à cet usage
PRÉCAUTION:
•Ne laissez pas dans le bateau des objets qui risqueraient de s’envoler ou d’être projetés hors du bateau durant le transport.
•Le bateau doit être bien gonflé.
•Ne pas utiliser l’étrier d’amarrage pour hisser votre bateau.
•Ne pas utiliser le treuil de la remorque pour hisser le bateau. Il ne doit servir qu’à la mise à
l’eau et à la fixation du bateau.
1.Ouvrir le
2.Positionner les rouleaux de la remorque de façon à répartir la charge du bateau sur ses flotteurs. Le tableau arrière doit être en appui sur la remorque.
3.Bateau à l’eau, faire glisser la remorque dessous.
4.Finir de hisser le bateau en utilisant les anneaux de remorquage latéraux [3].
5. | Sortir la remorque de l’eau. | E4 |
6. | Attacher le bateau : |
|
|
•à l’avant, par l’anneau d’amarrage [1], au treuil de la remorque,
•au milieu et à l’arrière en utilisant des sangles larges [2] passées à plat sur les flotteurs et fixées au châssis de la remorque.
7.Vérifier la fixation du moteur sur le tableau arrière.
8.Placer le moteur en position de navigation. Positionner l’embase sur un appui aménagé sur la remorque.
STOCKAGE
En fin de saison, laver l’ensemble du bateau à l’eau savonneuse. Bien rincer et laisser sécher. Stocker le bateau dans un endroit sec et frais, en évitant l’exposition prolongée au soleil ou au gel. Ne pas entreposer d’objet lourd sur le bateau plié.
37