RS485
Scan one of the following “Plug and Play” codes to program the scanner for an IBM POS terminal interface. Note: After scanning one of these codes, you must power cycle the cash register.
IBM Port 5B InterfaceIBM Port 9BIBM Port 9B
Each bar code above also programs the following suffixes for each symbology:
Symbology | Suffix | Symbology | Suffix | ||
EAN 8 | 0C | Code 39 |
| 00 | 0A 0B |
EAN 13 | 16 | Interleaved 2 of 5 | 00 | 0D 0B | |
UPC A | 0D | Code 128 | * | 00 | 0A 0B |
UPC E | 0A | Code 128 | ** | 00 | 18 0B |
|
| MaxiCode |
| 00 | 2F 0B |
*Suffixes programmed for Code 128 with IBM 4683 Port 5B, IBM 4683 Port 9B
The following selection allows you to break up large bar code data into smaller packets on an IBM POS terminal. To break up large bar codes into small packets, scan the Packet Mode On bar code below. Scan the Packet Mode Off bar code if you
want large bar code data to be sent to the host in a single chunk. Default = Packet Mode Off.
* Packet Mode OffPacket Mode On2 - 2