8

Utilities

To Add a Test Code I.D. Prefix to All Symbologies

This selection allows you to turn on transmission of a Code I.D. before the decoded symbology. (See the Symbology Chart, page A-1)for the single character code that identifies each symbology.) This action first clears all current prefixes, then programs a Code I.D. prefix for all symbologies. This is a temporary setting that will be removed when the unit is reset. For instructions on how to reset your image scanner, refer to Reset Image Scanner (page 8-1).

Add Code I.D. Prefix to

All Symbologies (Temporary)

Reset Image Scanner

Scanning this bar code causes the image scanner to re-link with the base.

Reset Imager

Show Software Revision

Scan the bar code below to output the current software revision, unit serial num- ber, and other product information for both the image scanner and base.

Show Revision

Show Data Format

Scan the bar code below to show current data format settings.

Data Format Settings

8 - 1