Image Scanner Report

Scan the bar code below to generate a report for the connected image scan- ners. The report indicates the port, work group, image scanner name, and address. To assign a name to your image scanner, refer to "Menu Command Syntax" on page 10-1.

Image Scanner Report

Image Scanner Address

Scan the bar code below to determine the address of the image scanner you are using.

Image Scanner Address

Base Address

Scan the bar code below to determine the address of the base you are using.

Base Address

Resetting the Standard Product Default Settings: Current Application Work Group

If you aren’t sure what programming options are in your image scanner, or you’ve changed some options and want the standard product default settings restored, scan the Standard Product Default Settings: Current Application Group bar code below.

The Menu Commands starting on page 10-6list the factory default settings for each of the commands (indicated by an asterisk (*) on the programming pages).

Note: Scanning this bar code also causes both the image scanner and the base to perform a reset and become unlinked. Refer to "Image Scanner Modes" on page 1-5for additional information.

Standard Product Default Settings:

Current Application Group

8 - 2