Honeywell HEMS II manual Front Panel, Back Panel

Chapter 1

Product Overview

Chapter 1:

Product Overview

Thank you for choosing the Linksys by Cisco EtherFast Cable/DSL Router with 4-Port Switch.. The Router lets you access the Internet through its four switched ports.. You can also use the Router to share resources such as computers, printers and files.. A variety of security features help to protect your data and your privacy while online.. Security features include a Stateful Packet Inspection (SPI) firewall and NAT technology.. Configuring the Router is easy using the provided browser-based utility..

Front Panel

Power  (Green)  The Power LED lights up and will stay on while the Router is powered on.. It flashes when the Router goes through its self-diagnostic mode during every boot-up or upgrades its firmware..

1, 2, 3, 4  (Green)  These numbered LEDs, corresponding with the numbered ports on the Router’s back panel, serve two purposes.. If the LED is continuously lit, the Router is successfully connected to a device through that port.. A flashing LED indicates network activity over that port..

Internet  (Green)  The Internet LED lights up when there is a connection made through the Internet port.. A flashing LED indicates network activity over the Internet port..

Back Panel

Reset  There are two ways to reset the Router to its factory default settings.. Use a straightened paper clip or similar object to press and hold the Reset button for approximately five seconds.. You can also restore the defaults from the Administration > Factory Defaults screen of the Router’s web-based utility..

Internet  The Internet port is where you will connect your cable or DSL Internet connection..

1, 2, 3, 4  These Ethernet ports (1, 2, 3, 4) connect the Router to computers on your wired network and other Ethernet network devices..

Power  The Power port is where you will connect the power adapter..

EtherFast Cable/DSL Router with 4-Port Switch 2