SW1 and SW2 are the switch banks inside the Checkpoint Device that set the deactivation range. The following is a list of Checkpoint recommended switch bank settings.
| Base Model | Checkpoint Recommended Switch Bank Settings |
MS2420 | SW1 & SW2 switches 1 and 6 set to ON |
MS2430 | SW1 & SW2 switches 1 and 6 set to ON |
All MS2420/MS2430 models have a connector labeled EAS In on the bottom of the unit. An optional EAS cable (PN
Figure 23. EAS Cable Connection (Bottom of MS2420/MS2430)
The following figure shows the location of the EAS deactivation area for the MS2420/MS2430. It is important to pass the entire tag through this area to deactivate the security tag.
Figure 24. EAS Deactivation Area
31